In this piece, I’m going to discuss the subject Why Is The Ready Light And The Cycle Light On On My Litter-Robot?, and I’m going to do my best to provide as much relevant information as I can.
litter-robot blue
and
yellow lights
on If both the blue and yellow lights are illuminated on your Litter-Robot, it means that the unit is in 8-hour
sleep mode
(The unit will not cycle automatically during those 8 hours.) If you’d like to deactivate sleep mode, press and hold the
cycle button
for 5 seconds.
Cycle Button: What does the
cycle button
do on Litter-Robot
Press and Release: Pressing the Cycle Button starts the Litter-Robot cleaning cycle In order to pause the cycle, press any button on the Control Panel during the Clean Cycle.
Why does my Litter-Robot keep saying drawer is full when I’ve just emptied and reset it?
Litter-Robot:
Debris may cause the DFI to indicate a full drawer regardless of the waste in the drawer Once you are done cleaning your unit, let it dry fully and then reassemble it.
How do you force a Litter-Robot to cycle?
Litter-Robot:
Make sure you do not press on the Litter-Robot when you press the reset button. Attempt to manually cycle the unit by pressing the “cycle” button If the unit cycles properly, move to the next step. Reset the CATS by turning the unit off then on using the power button.
How many years does a Litter-Robot last?
I’ve had two Litter Robots. One of them was refurbished and lasted 3 years with no issues. The other is going on 5 years with no issues – I haven’t had to spend any money on parts replacements. As far as cleaning, it takes me 30 minutes each month to fully clean the globe.
Litter-Robot Cycle: How often does the Litter-Robot cycle
Litter-Robot cycles 7 minutes after each use , but if the
wait time
is interrupted by another cat entering, the timer will reset for another 7 minutes, which could cause waste to be present in the litter for longer than 7 minutes.
Why does my Litter-Robot keep going offline?
Litter-Robot:
It’s called “Whisker” in the
app store
. Please try the following: Perform a hard reset on your Litter-Robot : Unplug the unit from the back of the base, wait 1 minute, then plug it back in and allow it to cycle. Check the app – if it still shows offline, please move on to the next step. Reboot your router.
How do you get the Litter-Robot out of sleep mode?
Litter-Robot:
To Exit Sleep Mode Press and hold the Cycle button until the yellow light turns off Or, if only the blue light is on because you are not within the 8-hour sleep period, when you press and hold the Cycle button, the yellow light will come on for a few seconds, then turn off to indicate you have exited this mode.
How do I reset my Litter-Robot 2?
Litter-Robot:
Activate the
cat sensor
by pressing on the globe just above the entrance in a forward and down motion The red light should come on now. Allow the unit to complete the timing, cycle, and return to home position. At this time, the unit will have reset itself.
Will Litter-Robot still cycle if drawer is full?
Drawer:
A flashing blue light on the Litter-Robot III Open Air is the Drawer Full Indicator (DFI) sensor advising the waste drawer is full and needs to be emptied.
How many cycles before a Litter-Robot is full?
Litter-Robot:
Typically, you will empty the waste drawer once per week if you have one cat. If you have more than one cat using the Litter-Robot, you will typically empty the waste drawer twice every seven to ten days. Perform a full cleaning and litter change every one to three months What happens when you don’t change cat litter?.
Do
litter robots
have a
lifetime warranty
?
Litter-Robot is backed by our WhiskerCare™ 1-Year Warranty and you have the option to extend this for 3 years of coverage. During the warranty period, Whisker will repair your Litter-Robot at no charge, including
free shipping
both ways.
Do cats like the Litter-Robot?
Litter-Robot:
In short, most usually. They love it as much as we humans do , but for different reasons. At first, many cats will be intrigued by the Litter-Robot’s cycling process, which draws them in. Amy’s cats, for example, started using the Litter-Robot within the first two hours of bringing it home.
How many litter boxes should a cat have?
Cat:
Follow this simple rule: one box per cat, plus one extra So if you have two cats, you should have three boxes. Making sure everyone has their space can help ease elimination issues. Some owners prefer a hooded box, but some cats don’t like them.
Cat Sensor Fault: What causes cat sensor fault
Sometimes after adding litter or replacing litter in the globe, the
total weight
of the globe becomes high enough that during the rotation or even while stationary (without cat inside) the cat sensor is triggered. If the Cat Sensor is triggered continuously for more than 2 minutes then the red light starts to blink.
Why does the blue light keep flashing on my Litter-Robot?
Litter-Robot:
If the blue light on your Litter-Robot is flashing, it means your drawer is full and needs to be changed.
Litter Box: How often should you scoop a litter box
How Often Should You Change the Cat Litter? If you use a clumping litter, it’s best to scoop the box daily and change it out completely at least monthly If you have more than one cat, it may be best to change the cat litter more often, every 2-3 weeks.
References
https://www.litter-robot.com/blog/litter-robot-troubleshooting-lights/
https://catevolution.co.nz/knowledge-base-litter-robot-8-hour-sleep-mode-solid-yellow-and-blue-lights