It’s as simple as purchasing an additional (compatible)
receiver collar
for each pet You can purchase additional receiver collars online or contact our Customer Care Centre.
Why is my wireless PetSafe collar not working?
But if you just changed it and it’s not working as intended, it may need resetting Reset the collar by removing the battery and holding down the
correction level button
for about 10 seconds. Then put the battery back in and switch the collar on. Make sure that the indicator light is on.
Can you replace the collar on a PetSafe collar?
Replacement 3/4-inch or 1-inch strap for PetSafe in-ground and
wireless fence receiver
collars. Simply remove the receiver unit from your pet’s old receiver collar and place it on the new collar strap.
How do I pair my PetSafe wireless collar?
Press the button on an angle to see the upper half of the button while holding. Press and hold the upper left button on the remote to pair the collar The collar will flash five times and then begin beeping to confirm it is paired. Release the button and test to confirm it is properly paired.
Are all PetSafe collars compatible?
All wireless fences will work with any wireless fence collar It is a good idea to know how to identify which system you have to ensure that you have a wireless system. You can identify your system using model numbers on your
base unit
, collar and product packaging.
Do other collars work with Invisible Fence?
Pet Stop Receivers are compatible with Invisible Fence® Also, your replacement collar will include Pet Stop’s exclusive Comfort Contacts® to cushion your pet’s neck with soft rubber. Pet professionals prefer Perimeter’s rubber Comfort Contacts to help avoid serious skin irritation and injury.
How do I reset my petsafe wireless collar?
Press and hold the button on the collar until a beep is heard and the light flashes green to turn the collar on. Press and hold the power button for 10 seconds to reset the collar The light turns red and the collar turns off. Continue holding the button.
Why is my
electric dog collar
not working?
Equipment Make sure your battery is charged in both the collar and the transmitter Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How long do PetSafe collars last?
How long is the unit supposed to last? The Wireless Containment System unit can last up to approximately 10 years or more if used properly. Batteries on the collar can last and be replaced up to 1 to 2 months.
What receivers are compatible with pet stop?
This Pet Stop receiver is compatible with most brands – PetSafeâ, Invisible Fenceâ, Dog Watchâ and Dog Guardâ This transmitter features a perfect marriage of patented technology and the kindest approach to training your pet – GentleSteps.
How do you put a new collar on an Invisible Fence?
You can purchase replacements through your local dealer by calling 866-804-1250 Yes! Bring your Invisible Fence transmitter and Computer Collar receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet(s) to their new boundaries.
How do you pair a dog collar with a remote control?
Match the Remote Control to the Receiver: Connect the Receiver to a power source via the USB cable , matching mode can only be activated during charging. Press and hold Channel Switch / Match Button for 5 secs. The Receiver will vibrate and beep which indicates the matching is complete.
How many collars can you use with PetSafe wireless fence?
You can add as many pets to your existing compatible wireless fence as you need. Just make sure each four-legged friend has their own PetSafe® wireless fence dog collar.
What receivers work with Invisible Fence?
The Perimeter Technologies Computer Receiver Collar is designed to replace your Invisible Fence brand R21 collar or add a new pet to your existing Invisible Fence system for a fraction of the cost. The Perimeter Computer Receiver Collar will work with your existing Invisible Fence brand 7K or 10K dog fence system.
Why is the red light flashing on my petsafe collar?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet’s Computer Collar unit, your Power Cap battery may need to be replaced You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
Will my neighbors Invisible Fence interfere with mine?
Q: Will my neighbors’ invisible fence interfere with mine? Neighboring invisible fences can interfere with each other Two wires that run too closely together can cancel each other’s signal, effectively allowing your dogs to travel back and forth between yards.
Will a PetSafe collar work with Premier pet?
Our wireless collars and PetSafe wireless collars are cross-compatible , so you could absolutely use one of our wireless collars with a PetSafe wireless system.
Should I take my dog’s collar off at night?
At bedtime. Removing your dog’s collar after the day’s last potty break can give the fur and skin beneath their collar a welcome breather If your dog moves around frequently at night or scratches and shakes their head a lot, removing their collar might make nighttime quieter for the human members of the household.
How do I know what frequency my invisible fence is?
Check your fence instructions for the exact frequency. If the instructions are unavailable, turn on a portable AM radio near the fence transmitter. Search the AM stations until you have found the correct one. You will know you have it when you hear a fast-paced clicking or beeping sound.
Is PetSafe compatible with SportDOG?
All of the PetSafe collars below are compatible with the SportDOG In-Ground Fence SDF-100A and with the Contain + Train SDF-CT (containment function only).
Is Innotek and PetSafe the same company?
Innotek is now part of the PetSafe family !.
What is the button on the PetSafe collar?
Press the button. The light will flash red. The number of flashes on the collar indicates the current collar level Press again quickly to increase the collar level.
Why is my Invisible Fence collar not working?
My pet’s Invisible Fence collar doesn’t activate at the boundary, what is wrong? Ensure that your pet’s Computer Collar receiver is fitted properly to his neck The collar should be snug enough to slide only one finger between a correction post and your pet’s skin.
What do you do if your shock collar doesn’t work?
Increase the Stimulation Range Refer to “Changing Stimulation Ranges” for more information. Make sure the Collar Receiver’s Contact Points are placed snugly against your dog’s skin. You may need to switch to the longer Contact Points included with your system or trim the hair beneath the Contact Points.
How do you reset an electric dog fence?
Replace the batteries of the main fence component, if possible. Some models have a battery-operated fence component that helps with the signal transmission. Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in.
Why is my petsafe collar not beeping or shocking?
If Receiver Collar does not beep and the Test Light does not flash, replace the 10. battery in the Receiver Collar If it still does not beep and the Test Light does not flash, contact the Customer Care Center at 1-800-732-2677. If the Receiver Collar beeps, there may be a complete or partial break in the 11.
Why is my PetSafe collar blinking green?
9. The receiver collar will emit a unique double tone as the contact points touch your pet’s skin. You will know that you have the proper fit when you hear the receiver collar emit the double tone and it flashes green 5 consecutive times. 10.
Why do dogs freak out when you take off their collar?
One reason your dog might be freaking out when you take off his collar is because he associates this act with something else This is known as operant conditioning.
Citations
https://support.petsafe.net/s/article/how-to-pair-your-collar-to-your-remote-100-yard-trainer
https://www.tractorsupply.com/tsc/product/petsafe-wireless-pet-containment-system-receiver-collar
https://www.petsmart.com/dog/crates-gates-and-containment/fence-systems/petsafe-wireless-pet-containment-system-receiver-dog-collar-5005401.html
https://intl.petsafe.net/en-gb/support/wireless-containment-system-add-a-dog-extra-receiver-collar