I like braided line for downriggers much better than the wire line because it is quiet in the water, strong, and doesn’t rust over time This downrigger line is a little more expensive than other wire line and even some braided lines out there but it will last you a long time.
What diameter is downrigger cable?
031 in / 0.79 mm dia, Bright, 300 ft / 92 m.
Is braided line good for trolling?
Braid is great for trolling but since it has very little stretch we recommend using a wind-on-leader or
mono tophsot
. We recommend using 30-130Lb braid as backing for trolling reels. Make sure any reel you spool on your trolling reels is spooled on tight!.
What is a
downrigger fishing rod
?
A downrigger allows you to fish a lure or bait at a
specific depth
accurately behind a trolling boat A downrigger contains a rod holder for storing your downrigger rod when it is actively fishing. The cannonball weight is deployed to the selected depth and allows the lure or bait to run at a specific depth.
What knot is best for braided line?
One of the most popular knots, the Palomar Knot is strong and relatively easy to tie. The Palomar knot is best for use with braided
fishing line
.
Is Palomar knot good for braided line?
The Palomar knot is a simple, but very strong and effective, knot. It is recommended for use with braided lines , and is so simple that with a little practice it can be tied in the dark. It is regarded as one of the strongest and most reliable fishing knots.
Can you tie braid straight to a swivel?
Use the Braid Knot to Connect a Swivel to Braided Line Even so, this knot like all knots, must be tied with care. Pull it up slowly and evenly so that the loops snug up neatly and don’t overlap. If it doesn’t look right – one of the loops is looser than the others for example – cut it off and start again.
What wire do you use for Scotty downriggers?
We Recommend: Scotty premium 12 gauge, 2 Conductor Downrigger Power Wire (Scotty part No. 1133) has been designed specifically for return runs of 25 feet or less. It is manufactured with heavy duty, annealed, tinned copper which provides maximum current flow and improved corrosion resistance.
What is the best knot for tying braid to fluorocarbon?
The Blood Knot is a great choice for splicing two lines of similar diameter. Ideal for attaching leader lines such as fluorocarbon or monofilament leaders to a braided mainline.
Is the trilene knot good for braided line?
The Trilene Knot usually tests at 95 percent or more of the unknotted line. It’s a proven knot for use with monofilament and fluorocarbon, and with Nylon and Dacron braids, but it is not an acceptable choice for gel-spun braided lines.
Should I troll with braid or mono?
Mono holds knots better and costs less than braid It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.
Do you need a leader with braided line?
You need to connect a leader to your braided line if you are fishing rough grounds or super clear waters, or if you are targeting sharp-toothed fish like flounder, bluefish, or the sharks. Apart from that, it should be okay to use straight braid without expecting any problems.
Is braided line better than fluorocarbon?
Today’s anglers use braid for numerous applications, not only for its tensile strength, but because of the way it behaves on the spool, particularly with spinning reels. Braid combats line twist better than mono or fluoro , and if used in
lighter pound tests
, it will outcast them as well.
How many lines can you run off a downrigger?
Active Member. If you can run two downriggers with one line each and do it smoothly, then you should have no problem running 2 lines off each one Set up your first lines as you normally would. drop them 20′ and clip on your next line.
How fast can you troll with a downrigger?
Most people troll at 1.5 to 3.5 mph How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.
Can you use any rod with downrigger?
Fast action graphite rods, like the type you would use for casting, do not belong loaded onto a downrigger So again, select an all-fiberglass or graphite-fiberglass blend construction fishing rod.
Are downriggers worth it?
Downriggers are an efficient way to put live bait and lures in precise zones of the water column , and all anglers know that being in the right depth leads to more fish in the box. Downriggers are consistently used to target king mackerel, amberjack, cobia, grouper, among others.
How much line do you need behind a downrigger ball?
5′ depending on your speed If I fish at a depth of 40′ or more I only run my set-up 5′-15′ in back of boat. Like to stay within the black box range of 20′ around the wire. When useing ball trolls, I run the dodger 2′ in back of trolls and 4′ up.
How much weight do I need on my downrigger?
Six to eight pounds is typical for most moderate depth freshwater applications and ten pounds is typical for saltwater (see Weight Table). The amount of weight needed on a downrigger is a function of the speed you are trolling and the depth you are fishing.
How long should a salmon troll leader be?
For a fly or hoochie I use 40 to 44-inches of leader from where it ties onto the flasher to the tail hook. On a spoon, because it has action of its own, I use a lighter leader – from 22 to 25-pound breaking strength. When fishing for coho I’ll use approximately 36-inches of leader and, for chinook, about 48-inches.
Can fish see braided line?
While there are many benefits to using braided lines, being undetected by fish is not one of them The braided line offers excellent strength for a thin diameter, casts extremely far, and also does not stretch.
What’s the strongest fishing knot?
The Palomar Knot is the strongest fishing knot in many situations. This knot only has 3 steps making it extremely powerful and very basic. Since there are not many twist and kinks in this knot it makes it extremely tough to break. It can be used on Braided line and Mono-filament.
What is the strongest braid to mono knot?
Generally speaking, the best knot to tie braid to mono leader is considered to be the Double Uni Knot While the Double Uni Knot is one of the simplest line-to-line connections that can be used with two lines of relatively similar diameter, there are a few other knots that you may want to try in certain situations.
References
2202K 250lb. test – Heavy Duty Braided Downrigger Line – 400ft
https://www.sportfishingbc.com/forum/index.php?threads/lets-talk-downrigger-braid.73328/