Fluorocarbon can be used as a mainline, provided you invest in a high-quality fishing line Using a high-end fluoro line as a mainline offers many benefits such as excellent casting distance, abrasion resistance and is virtually invisible underwater. Fluorocarbon lines are fantastic lines in their own right.
What is the best fluorocarbon mainline?
The Ghost Dragonfly , in their own words, is what you might call the highest quality fluorocarbon on the market. Ghost Dragonfly is very, very durable. It has very little elongation and sinks like a brick. In addition, Ghost Dragonfly does not absorb colour particles and can be used very well as a normal mono main line.
Can you spool your whole reel with fluorocarbon?
heavier monofilament
and fluorocarbon lines do not perform well on
spinning reels
because the diameter of the line is large enough that the spooled line will jump off the
reel spool
when casting. This creates monstrous backlashes that are not easy to fix – plus it wastes time on the water.
Can you fish straight fluorocarbon?
Over the past few years, braided lines with a
fluorocarbon leader
have become a go-to set-up for anglers fishing spinning gear. It’s a combination that works exceptionally well and generally; the only question is which connection knot to use.
Should leader line be stronger than Main Line?
First and foremost, the rule is to use a leader line weight less than (weaker) the mainline For example, if your using a 15# monofilament mainline, you’ll likely need a <= 12# leaderline. The reason being if you ever get snagged or hung up, you can break off on your leader line vs. the mainline.
Do I need to soak fluorocarbon line?
How to spool up with fluorocarbon. 1 Start by soaking the bulk spool of line in a bowl or bucket of warm water to make it supple and reduce the line memory So the line memory is not increased make sure the line is coming off in an anti-clockwise direction before spooling-up.
What fluorocarbon do pros use?
Berkley Trilene 100% Fluorocarbon —Choice of the pros, engineered for the highest shock strength in a fluorocarbon, plus abrasion resistance and knot strength. Berkley Vanish—A great all-around pick thanks to its easy-casting, sensitive nature.
Should you soak your fishing line before spooling?
Before you ever spool a new monofilament fishing line to your reel, you should always let it soak before spooling Allowing time for the monofilament to absorb the water will reduce the line memory and allow the line to be laid on the reel better than if you did not let it soak.
How often should you change fluorocarbon fishing line?
Fluorocarbon line can last up to 5 years when stored and does not require any special storage conditions. Fluorocarbon lines on reels should be replaced every 2 years max for
infrequent anglers
, 2 to 3 times for moderately anglers, and high-frequency anglers should replace 4 or more times a year.
Does fluorocarbon have backlash?
Fluorocarbon fishing line has a reputation for backlashing or birdnesting when casting bait casters and spinner reels Fluorocarbon is made from PVDF, which creates a lot of line memory that contributes to backlashes.
What is the best line for a spinning reel?
Line choice for spinning gear Of the two, braided line is superior on a spinning reel. It is small in diameter, casts far, has no stretch, is incredibly strong, is extremely durable, and, most importantly, has virtually no line memory. All of these attributes make braided line a dream come true for spinning gear.
What fishing line do the pros use?
Most professional anglers today use very little monofilament line.
Should I use monofilament or fluorocarbon?
Over the long term, fluorocarbon is extremely resistant to the elements as well, unlike monofilament Overtime, U.V. rays, rain and humidity, and extreme temperatures (both hot and cold) can cause monofilament to break down and lose strength. Fluorocarbon is much more resistant to these conditions over the long term.
Can I use leader line as main line?
A leader line is a separate piece of fishing line that connects your main fishing line to your hook or lure Generally speaking, your leader line will take the abuse from fish and underwater structures/rocks and not your mainline because your leader line is closest to the bottom and is in the fish’s strike zone.
Does fluorocarbon cast further than mono?
Casting distance, fluoro is way behind the other two for me while mono casts better than braid when comparing similar diameters, although you’re usually getting 4x the breaking strength from the braid, so it’s pretty easy to go down a size or two to gain extra distance.
Can I use fluorocarbon as backing for braid?
Either use nylon/fluoro as backing or as some have suggested electrical tape The line capacity of the reel will be for mono line so expect to use your full spool of fireline to fill it. You may need 2-3mm of backing on the reel first before you spool up with braid.
What fluorocarbon line has least memory?
Sunline Super FC Sniper features a triple resin coating for improved limpness, handling, and abrasion resistance, and the result is a truly superior cast for fluorocarbon. It also gives this line very low memory, and we’d even think about running it on a spinning reel as a result.
Is fluorocarbon hard to cast?
While fluoro has some very obvious benefits which keep it on the playing field–extreme clarity, durability, low stretch and a high density that causes it to sink, taking diving lures deeper– it can be very difficult to cast.
How do you spool a fluorocarbon line?
When spooling fluorocarbon on a baiticaster, turn the spool up on it’s side and make sure the line feeds from the top of the spool into the reel. Put resistance on the line spool, and wind it on evenly and slowly. Braided line should be tightly wound on the reel. Fluorocarbon needs firm tension but not ultra tight.
Do I need a leader with mono line?
These weaknesses necessitate the use of leaders, as many experienced largemouth anglers can attest. And whether you run braid, fluorocarbon, or nylon monofilament, when you’re after sharp-toothed fish like pike, mackerel, barracuda, wahoo, or shark, a tough leader is essential.
Why does my fluorocarbon keep breaking?
A couple of points to note on fluorocarbon line; ensure you moisten the line thoroughly when cinching the knot down, and also if you get a backlash and kink the line, the kink will be a weak spot prone to breaking.
What is the most invisible fishing line?
Fluorocarbon line is touted by line companies as the most invisible line on the market. It is said to have the same light refraction properties as water, making it virtually invisible or as invisible as the fishing line can get.
What is the best knot to use with fluorocarbon?
So, what is the best knot for fluorocarbon? Sunline recommends using the Tornado HH Knot We recommend this knot for fluorocarbon because the knot strength of the Tornado HH knot is nearly 100 % of straight strength. Meaning the knot has the same tensile strength as the line.
Why use a swivel on a fishing line?
The main purpose of the swivel is to allow the two line sections to rotate independently of each other , which allows self-unwinding of any twists formed during line casting and retrieval, preventing undesirable tanglings.
Can leader be heavier than Main Line?
A leader is a length of monofilament line tied to the end of the main line that is on your fishing reel. It can be a metre long if you fish for bream and whiting or it can be 6 or 7 metres long if you gamefish. It can be lighter than your main line or it can be much heavier than your main line.
Can pike bite through fluorocarbon?
Fluorocarbon is more abrasion resistant than monofilament and braids, so it has a better chance in contact with razor pike teeth Most scientific sources also consider it much less visible to fish than monofilament and, especially, braid under water.
Does fluorocarbon line twist?
While fluorocarbon lines look and feel similar to monofilament they are different in many ways. For example, fluorocarbon lines tend to resist twist even more than monofilament , which can make them more difficult to manage when used on a spin reel – especially in heavier pound tests.
Does fluorocarbon line have memory?
Fluorocarbon line memory is noticeable as the line coils, like a corkscrew, when not under tension The coils of the line fall off the reels spool when the line is slack. Line memory occurs because the line takes the shape of the spool or reel that it’s wound onto.
Is fluorocarbon good for Baitcasters?
With modern braid and mono fishing lines, the truth is that it can be hard to go wrong. Even a spool full of fluoro, although often not ideal, will work well enough on a baitcaster.
Do you put mono on before braid?
If you use normal monofilament, you can just fill your reel right up with it, but if you use braid, you need to put a base layer of monofilament on the reel beforehand This is called mono backing, and it could save you from losing the biggest fish of your life.
What are the disadvantages of fluorocarbon?
The drawbacks of fluorocarbon can be summed up in a single word: inflexible. This is essentially a hard line which is what makes it water and abrasion resistant. However, there can be several serious issues that derive from this that an angler must be aware of. The first of these issues is knot failure.
What are the cons of fluorocarbon line?
Cons: Stiffer than mono, especially in higher strengths; sinking quality not helpful in all angling situations; cost is much more (roughly 50 percent) than mono Comments: Fluorocarbon makes up just over a quarter of the fishing line market.
Which fishing line has least memory?
Memory is a line’s tendency to take on the spool’s shape. The more it takes on this shape, the more memory it’s said to have—and a lot of memory is not something you want your line to exhibit. In general, monofilament lines tend to have more memory, and braided lines tend to have less.
Sources
https://www.carpology.net/article/features/how-to-make-fluorocarbon-main-line-behave/
The Best Fluorocarbon Fishing Line for Leaders and Main Line