Do Dog Clipper Blades Get Dull?

Clipper blades dull for a variety of reasons Despite seeming soft and gentle,

dog hair

is relatively thick and wears down the

sharp cutting edges

with repeated use. Every hair puts miniscule dents in the edge of the blades, transforming even the sharpest blades into dull, useless hunks of metal.

How do I know when my clipper blades need sharpening?

If you are finding the clipper blade is snagging and tugging at the coat , it is time for it to be re-sharpened. A rule of thumb, if you are cleaning and oiling your blades frequently, then a

dog blade

will last between 10 -12 weeks based on clipping 5 dogs per day.

How often should you sharpen dog clipper blades?

Dog owners need to know how to sharpen dog clipper blades the right way. You might be one of those who wonder how to execute the task correctly. Essentially, you must also acknowledge that the sharpening process is a necessary skill to groom your dog. Dog clippers should always be sharpened every time you use them.

How often should you replace dog clipper blades?

Every 4 months (or as needed), replace the mechanism that holds the blade on the clipper (usually hinge and blade latch).

Can Wahl clipper blades be sharpened?

Turn your blade sharpener on, and apply a small amount of Wahl clipper blade oil to the sharpening disk The disk lies horizontally on the base and moves gently to sharpen the blades, and the oil makes the blades glide evenly across the disk for even sharpening.

How often should I get my clippers sharpened?

How often should I get my clipper blades sharpened? As often as necessary to keep your blades cutting smoothly, to keep your blades from pulling hair/fur, and to keep your client’s hair/fur healthy by being cut cleanly and not ripped apart.

Why won’t my clippers cut my dog’s hair?

If your blade or comb attachment gets clogged with fur as you clip , it won’t be able to cut properly, even if the blade is sharp and the clipper motor has enough power to handle the dog’s coat type. Before you clip it’s important to remove stuck, dead coat.

Can you sharpen clipper blades with salt?

Thirty years ago, groomers used salt to get by with their dull blades. At that time, you had to push the blade into the salt (covering the

cutter teeth

) and let it sharpen until its looks like the salt is pulverized, then pick it out and push it into another part of the salt.

Can you sharpen clipper blades with sandpaper?

You can save yourself some cash by learning how to sharpen clipper blades with sandpaper This is the easiest method, as you’re sure to have sandpaper within reach all the time. But there are many ways to bring blunt blades back in good working order.

How long does a dog grooming blade last?

This part of your clipper should be replaced every 3-4 months for a busy dog groomer. A worn drive lever can produce ‘tram lines’, snagging and the appearance of a dull blade. For only a few pound you can avoid this problem.

Why do clipper blades get dull?

In addition to the condition of the coat, clipper blades can go dull if they are exposed to extreme changes in temperature When a metal clipper blade heats up during use, the metal expands. When the blade cools down, the metal contracts.

Do hair clipper blades go dull?

Most hair clippers have an auto-sharpening feature that keeps the blades sharp, but they may still wear out quickly if they are not regularly oiled and cleaned Prevent ragged, uneven cuts and snagged hair by sharpening your blades each time you notice problems.

How often should you oil dog clippers?

Oiling teeth has to be done every time you put a blade on your clipper Why? Because the dog hair you are cutting removes oil from blade teeth. The first three points do need to be oiled again in the same day unless you wash the blade.

Can dog clipper blades be sharpened?

To sharpen dog clippers, you’ll need a 4,000- and 8,000-grit whetstone To get started, spray the whetstones so there’s a thin layer of water on the surface. Then, hold your dog clipper blade against the 4,000-grit whetstone, and move it side to side across the stone 5-10 times.

Can you sharpen grooming blades?

You need to make sure you have everything you need to sharpen your clipper blades If you are a first-timer, here are a few things you’ll need: A Screwdriver – You’ll use it to unscrew the blades off the clipper and back. A Sharpening Stone – It should be a 3000 and 8000 grit combo for the best results.

How do you sharpen Wahl clipper blades at home?

Run your blade left and right in a horizontal direction across a Whetstone honing stone. First on the coarse side to sharpen the blade then on the finishing side to smooth out the blade.

Why are my Wahl dog clippers not cutting?

Remove the blade from the clipper. Use a small cleaning brush to get any loose hair that may have accumulated between the blade and clipper You may also use a pipe cleaner or index card to clean between the teeth of the blade. Next, you should oil your blade regularly.


Sharpening Dog Clippers – How to Sharpen Dog Clipper Blades?