The following topic, How Much Does A 16 Foot Lund Cost?, will serve as the primary emphasis of this blog post, and you can expect to learn a significant amount of information that is pertinent to the subject from reading it. If you are interested in gaining more knowledge on this subject, continue reading.
$13,059 * A fierce competitor on the water.
Is Lund a
good fishing boat
?
One the most reputed fishing boat companies in North America , Lund has since 1948 provided both competitive and
amateur fishermen
with some of the most innovative vessels on the market—all to ensure you’re well-armed for whatever the
fish throw
at you.
Lund Boat: Can you use a Lund boat in the ocean
Can Lund boats be used in saltwater? Yes, a thorough fresh water rinse is recommended after each use in saltwater.
Lund Boats: Do Lund boats hold their value
Although some attribute this to their higher initial price point, Lund boats have a reputation for holding their value A 1775 Impact Sport made in 2015 sold new for $29,725 in that year. This boat has a current average resale value of $22,900. This is a depreciation of 23%, which is very good for about 5 years.
Lund Boat: How long does it take to get a Lund boat
How long does it take to get Lund boat after ordering it? While the standard estimate for a Lund boat to arrive in four to six weeks , as demand increases, so does that wait time. Ordering a custom boat will likely add to your wait time.
Lund Boats: Do Lund boats leak
Lund Boats are Riveted The downside is that a riveted boat is more likely to leak I know this from personal experience. My small fishing boat has rivets, and it leaks. The leaking isn’t severe, but the bottom of the boat definitely has water in it when I’m done.
Lund Impact: What is the difference between Lund impact and Pro-V
According to Lund’s website, the Pro-V 1875 is capable of a max speed of 56mph compared to the Impact 1875 Sport’s 52mph.
What years did Lund have
transom issues
?
This is a common problem with 2000 to 2007 vintage Lunds. That was the end of the Genmar era before they were purchased by Brunswick. Unfortunately there is no warranty on these boats.
Salt Water Damage Aluminum Boats: Does salt water damage aluminum boats
Saltwater can and will corrode aluminum This does not mean that aluminum boats aren’t ideal for ocean use, but it does mean that they will need a little special attention. The way salt damages aluminum is a process called galvanic corrosion.
Lifetime Warranty: Do Lund boats have lifetime warranty
Lund Boats are proud to offer “BOATING’S BEST WARRANTY” Lund’s lifetime warranty gives you the
best overall coverage
ever available on
hull material
and workmanship. Warranties include: Lifetime warranty on double-riveted seams. Lifetime warranty on all plywood panels,
related materials
and labor.
Salt Water: Does salt water eat aluminum
Does aluminum corrode in saltwater? Yes, it sure can We’re talking about galvanic corrosion. Back in science class you’d say that this is where one metal in an electrically conductive solution (such as salt water) gives up atoms when connected to a dissimilar metal in that same solution.
Lund Boats: Where are Lund boats made
Since 1948, Lund has been building boats from the heart of lakes country in New York Mills, Minn Built with professional grade materials to withstand a lifetime of use, Lund Boats are guide tested and wilderness proven and demanded by more camps, resorts, fishing guides and professionals throughout North America.
Size Boat: What size boat can I tow
Maximum allowed
trailer length varies
state-to-state, from 30 feet to 60 feet States also stipulate the combined length of the tow vehicle and trailer, which ranges from 50 to 85 feet.
Bass Boat: How much towing capacity do I need to tow a bass boat
Above all else, don’t skimp. If your rig weighs 6,000 pounds, select a tow vehicle with a towing rating of 7,500 to 8,000 pounds to be safe.
Lund Boats Foam: Are Lund boats foam filled
Lund strategically injects marine-grade closed-cell foam into all our boats.
Foot Jon Boat: How many people can fit in a 14 foot jon boat
14 feet (4.3 m) long Jon boat The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
Foot Aluminum Fishing Boat Weigh: How much does a 16 foot aluminum fishing boat weigh
This puts the boat in the 16 to 20-foot length range. The weight on these boats is usually between 1,500 and 2,500 pounds without the motor With a larger engine and a trailer, you could be looking at a weight that is well over 5,000 pounds.
Does mercury own Lund?
Lund and Crestliner are owned by Brunswick Corporation , the
largest marine manufacturer
in the world. For additional information about our boats and our brands visit www.lundboats.com and www.crestliner.com.
Lund Boats Aluminum: Are Lund boats aluminum or fiberglass
The Lund 202 Pro-V GL professional fiberglass fishing boats have all the features tournament angler come to expect from a Lund.
Lund Boats: Is there wood in Lund boats
For 2018 and forward… No wood in transoms throughout the Lund line up Its amazing that it took any boat company this long to figure out that wood as a component material was a bad idea.
Aluminum Boats: Do aluminum boats rust
Although
aluminium boats
are corrosion resistant , they are not corrosion proof, especially if a low-grade aluminium is used. Luckily, there are a variety of ways to prevent and protect your boat from the effects of oxidation and corrosion.
Aluminum Boat: How do you get salt off aluminum boat
Salt is soluble so warm water should remove it without difficulty. The aluminium oxide resulting from corrosion of aluminium is best removed by grit blasting with a soft grit.
How do you protect aluminum from saltwater?
Saltwater:
When salt air and salt water come into contact with aluminum they can cause both the chalky, white coating of aluminum oxide and unpleasant pitting. Fortunately, there’s an easy way to protect aluminum from salt water and prevent unsightly corrosion: a powder coating.
Fiberglass Boats: Does Lund make fiberglass boats
TACKLE STORAGE The Lund Tyee GL fiberglass boats utilize every square inch to maximize space for fishing tackle and gear. Whether it’s rain gear or tackle boxes, Lund has it covered.
Ft Aluminum Boat: How wide is a 14ft aluminum boat
14 feet (4.3 m) long Jon boat This 60 to 70 inches (1.5 – 1.8 m) wide Jon boat comes with a bow decked area and two bench seats. It is an excellent choice for fishing and recreation with friends.
Foot Aluminum Boat Hold: How much weight can a 14 foot aluminum boat hold
A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear.
Is Lund still building boats?
Boats:
Today, Lund retains its reputation as the industry’s leading aluminum fishing boat company Built by fishermen for fishermen, we continue to innovate while honoring the boat-building traditions that have made the name legendary.
Good Brand: Is Lund a good brand
Lund Boats is famous as a high-quality brand Many buyers choose a fishing boat based on a combination of price and quality, but if you’re looking for the best of the best in quality, go for the Lund. Lund Boats costs more than most of its competitors on the market, but the quality is unmatched.
Good Boat: Does Lowes make a good boat
Lowe Boats is considered to be an entry-level brand of aluminum boat manufacturer. There are some problems, but the company has a strong reputation for honoring its warranties. Considered not as good as Lund or any of the top-tier aluminum brands, they are considered a good value for the money.
Lund Boats: What is the warranty on Lund boats
Lund offers it’s Boating’s Best Lifetime Warranty , including a lifetime warranty on double-riveted seams, transom and flooring. There’s also a three-year bow-to-stern coverage.
Lund Fiberglass Boats: Who makes Lund fiberglass boats
Now comes Lund, owned by Brunswick , manufacturer of Mercury Outboards and a host of other boat brands, including Crestliner and Triton, throwing its weight and considerable dealer network behind four fiberglass models, each made in Tennessee at the Triton plant.
Alumacraft Boats: Are Alumacraft boats welded or riveted
For instance, Alumacraft’s Jon boats are welded, and most of their tournament boats are riveted Both methods are durable options when they are properly done. One advantage Alumacraft currently has is that most of their hulls are one piece, so there is no seam in the center (the ribs are still riveted).
Toughest Aluminum Boats: What are the toughest aluminum boats
The 1/4″ tubular bull nose bow on the F4 Pro Console is the toughest of any production or custom hard core duck boat. Plus the hull is 125 thick and built from hardened 5086 aluminum, the strongest aluminum that can be formed into a boat.
Lund Tyee: What is a Lund Tyee
The Lund Tyee Limited is a premium aluminum family fishing boat that’s loaded with custom upgrades like an exclusive graphics package, custom black window frames, Pro-Ride seats, premium stereo and custom trailer.
How long do transoms last?
On to fabricating the replacement transom: Most, if not all wooden transoms in smaller boats are made of plywood. From the looks of the transom in this boat, I would estimate a typical transom will last about 20 years or so before they need to be replaced.
Lund Boats: Are Lund boats made in Mexico
Brunswick Corporation’s manufacturing facility in Reynosa, Mexico , has recorded more than four million hours, which is nearly three years, without a lost-time incident. The plant has been part of Brunswick since 2002 and builds Bayliner, Sea Ray, HeyDay and Lund Fiberglass Sport Boats ranging from 16 to 25 feet.
Aluminum Hull: Is aluminum hull better than fiberglass
Aluminum is more durable than fiberglass , which is prone to breaking or cracking from impact. Aluminum is more resistant to punctures also. Though sharp objects hit with enough force can puncture an aluminum hull, it is less likely to cause major damage.
How long does an aluminum hull last?
The alloys 5000 and 6000 series which are mainly used in shipbuilding are known for their high strength. Usually, an excellent aluminium boat can live 30-40 years easily with regular and little maintenance.
Aluminum Boat: How do you maintain an aluminum boat
The best way to maintain the aluminum hardware on your boat is to wash it regularly with soap, and coat it with wax at least twice a year If you don’t do this, oxidation will sooner or later dull and discolor the surface of the aluminum.
Citations
https://www.lundboats.com/faq.html
https://www.nadaguides.com/Boats/2020/Lund-Boat-Co