Simple to Use: Plug in adapter and swap on the automated feeder, obtain Sensible Life App. Set feeder into connecting mode(led indicator flashing), scan and add this
sensible pet feeder
in App 3 D batteries required.
How do I reset my smart pet feeder?
Press the pinhole button on the top of the feeder with a pin or paperclip to reset Note: Resetting the feeder will erase
current settings
and require meals be rescheduled.
How do I reset my Peteme automatic feeder?
1) make sure your
smart phone
is connect to a 2.4GHz Wi-Fi router. 2) press the “Feed” button on the automatic feeder, hold and wait for 5-10 second.
How do I connect my smart pet feeder to my WIFI?
Add pet feeder via
auto scan mode
Choose Auto Scan Mode on the Wi-Fi pet feeder page and enter the correct name and password of the 2.4GHz Wi-Fi network Make sure the feeder’s indicator LED is flashing RED rapidly. Wait for the feeder to connect to the Wi-Fi network and appear in the App.
How do you reprogram a microchip feeder?
- Reset your SureFlap Microchip Pet Feeder to factory settings. To reset the feeder to factory settings, hold down the Add Pet Button for 10 seconds
- Re-Learn any pet(s) you would like to use the SureFeed Microchip Pet Feeder. When learning your pet into the feeder, make sure all other pets are kept away.
Why is my SureFeed flashing orange?
If your feeder is flashing an orange light, it is in Training Mode This mode is designed to help your cats get used to the opening and closing lid without getting spooked. There are four stages to Training Mode, so if you’re struggling to switch out of it, keep pressing the Fn button until the light turns green again.
How do you change WIFI on Dogness app?
Push and hold the feeding button until you heard the beep , it should reset the wireless connection.
What is the Wopet app?
It sends notifications for scheduled feedings and I can access the
video camera
any time without issue To have it connected to more than one phone (device), both devices must be logged into the Wopet app with the same email and password.
How do I reset my Skymee Wi-Fi?
Before connecting, you need to reset the device: use a pin to insert the reset hole on the back of the device for 5 seconds 4. When entering the wifi password, please make sure the password is correct and the length is not more than 16 characters.
How do I reset my SureFlap?
- Remove the battery cover lid.
- Press and hold the memory button for at least 10 seconds.
- The indicator lamp will stay on for the duration that the button is held down.
- When the memory is wiped, the catch will open and close automatically.
- Let go of the memory button and replace the battery cover lid.
How do microchip feeders work?
Microchip cat feeders work using a special mechanism that detects a pet’s identity by reading their implanted microchip or collar tag that comes with the feeder Once the feeder’s sensors detect an approved ID, the lid opens automatically, which is only possible if you have programmed the device to recognize your pet.
Why does my SureFlap keep flashing red?
How to tell if the batteries need replacing on the SureFlap Microchip Cat Flap. If the LED light starts flashing red every five seconds, this is an indicator that you need to replace the batteries.
Are SureFeed and SureFlap the same?
Sure Petcare® became the new company name for SureFlap® in 2017 , to reflect our future strategy to expand our range of connected products. The SureFlap, SureFeed® and SureSense® product brands remain and play an important part of the company’s heritage and continued success.
How do you train a cat to use SureFeed?
To reassure your pet, take the bowl out of the feeder and serve your pet’s food in their normal place in just the bowl move the feeder away from them. Over time, gradually move the feeder closer to the bowl until you can put the bowl onto the mat and then finally into the feeder itself.
How do I connect my wireless camera to my phone?
(This can be done by going to the settings in your Android phone and turning on the “hotspot” function—usually called “mobile hotspot” or “portable hotspot”. Set a password for the hotspot connection.) Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.
Why won’t my security camera connect to my Wi-Fi?
Make Sure the Wireless IP Camera Is Powered on Check if the power supply of the wireless IP camera is working properly. Make sure the power adapter is plugged into a working socket. If you get a battery powered wireless IP camera, check if the battery is still at work.
References
https://support.petsafe.net/s/article/Troubleshooting-for-Smart-Feed