Are Jon boats good for fishing?
Are jon boats good for fishing? Jon boats are great for freshwater fishing in calm water and where access is limited Jon boats are very practical, are inexpensive, and are very durable which make them a perfect fit for many fishing situations in freshwater.
Is a 12 foot jon boat big enough?
A 12-foot jon boat is perfect for teaching young anglers how to fish You can access
small unpressured waters
, and because you’re sitting close to each other (unlike in a canoe), it’s easy to help them with gear problems, and take pics of a big fish before letting it go.
What is the difference between a
bass boat
and a jon boat?
Hull – the jon boat’s
aluminum hull
is thinner than the fiberglass hulls of the bass boat and is usually a single layer design.
How much does a 16ft jon boat cost?
A 16ft jon boat will average approximately $3000 As already stated, this does not include the trailer or motor. There is quite a bit of variation in price from one model to another though, with low end being around $2100 and top price being almost $3400, so you should be able to find something in your personal range.
Are Jon boats good for
shallow water
?
When it comes to shallow water fishing, Jon boats can’t be beaten The
flat hull
is great because it allows you to cruise over shallow water, mud, or reeds to get to the most desirable fishing spots. This is especially helpful when fishing for bass or other fish that like to hide away from the open water.
How shallow can Jon boats go?
But the question remains… how shallow can a Jon boat run? Many boaters report being able to easily drive in water from 1-2 feet with their flat bottom Jon boats.
How much weight will a 14 foot jon boat hold?
A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear.
Why do they call a jon boat a jon boat?
Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.
How big of a motor can you put on a 12 foot jon boat?
12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP , however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.
What size jon boat is most stable?
Therefore if you’re looking for stability for a larger crew of heavier people, say two big and heavy guys or more, your best bet is a very large Jon boat or skiff, that is 6 ft or more in width, and over 16 ft in length , and preferably with a V shaped bottom, so that you could drive it at higher speed.
What is the most popular size jon boat?
Jon Boats are commercially produced between 8 and 20 feet in length (though sometimes longer), with the most common sizes being 10-16 feet long.
What are the disadvantages of a jon boat?
- Rough Water. Most Jon Boats are going to have a relatively flat-bottomed hull shape instead of a more traditional V-shaped hull
- Leisure and Comfort. In fairness, leisure is fairly subjective from person to person
- Water Sports
- Need Size for Speed
- Engine Noise.
Can you turn a jon boat into a bass boat?
Converting jon boats into bass boats has really taken off in popularity over the last few years. And for good reason! It’s totally possible to DIY your way into an extremely fishable rig for a fraction of the price you’d pay for a name-brand bass boat.
Can you use a bass boat in the bay?
The problems with bass boat in a salt water environment is just that, the salt water environment. I don’t know the type of boat or engine but most bass boats have carpet flooring (which doesn’t like salt water) and the hardware used is not up to the salt water abuse. So, can you use it, absolutely.
Can a jon boat go in the ocean?
Jon boats can be taken out into the ocean but must be done so with caution Boats shorter than 16 feet in length present a significant hazard on the open water due to stability and power rating.
What are the benefits of a jon boat?
- They Are Affordable. Jon boats are usually the most budget-friendly type of boat
- They Are Easy To Use. Some Jon boats are powered by a simple pair of oars
- They Are Easy To Transport. Jon boats are small and light
- They Are Versatile
- They Are Easy To Maintain.
What is the widest jon boat?
SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.
How big do Jon boats get?
Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide , though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.
Are Jon boats good for trolling?
Jon boats are a very popular form of light watercraft. They have a flat-bottomed hull that makes them excellent utility boats. Their usefulness in shallow water and recreation makes them a great match for trolling motors These small, electric motors accentuate the benefits of Jon boats.
What’s better flat bottom or V bottom boat?
While flat bottom boats are built for leisure, deep v boats were born for efficiency While a deep V boat can’t take you as far into shallow waters or stay as stable in calm waters as a flat bottom boat, they deal with choppy water far better that their flat bottomed cousins.
How heavy is a 12ft jon boat?
An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load.
What makes a boat a bass boat?
A bass boat is a small boat that is designed and equipped primarily for bass fishing or fishing for other panfish , usually in freshwater bodies such as lakes, rivers and wetlands.
How long do Jon boats last?
But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.
Does adding foam to a boat help it float?
Flotation foam can be an important addition for sink-proofing, thermal insulation, and soundproofing such boats as sailboats, jon boats, aluminum v-hull fishing boats, speed boats, canoes, bass boats, and pontoon boats. It can also help keep floating docks riding higher in the water when loaded down with weight.
How are bass boats different?
Bass boats are designed specifically for bass fishing, with sleek, low profiles that offer less water disturbance for better fishing These boats are typically able to carry two to three passengers or anglers, but some larger models may hold four or five people.
What makes it a jon boat?
Jon boats have a flat or nearly flat bottom They have squared-off bows rather than coming to a point at the front. Most jon boats are made of aluminum, though there are also a handful of fiberglass and roto-molded polyethylene models on the market.
How much is a bass fishing boat?
How Much do Bass Boats Actually Cost? On average, bass boats mostly fall into the range of about $20,000 to $45,000 That’s not to say you can’t get bass boats cheaper. For the smallest, most basic bass boat out there, you can expect a price tag of approximately $10,000.
What size trolling motor do I need?
Boat weight is the most important consideration to take into account when choosing a trolling motor. A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.
What size waves can a jon boat handle?
While they will be less stable and less smooth than most boats with a v-shaped hull, Jon Boats can reasonably handle most rough water with wave heights of up to 4 feet.
What is the draft on a jon boat?
The bottom pod step is 6″ so it is a legit 5″ draft with over 500# of batteries in it to simulate weight.
How deep are Jon boats?
Jon Boats are available in a range of sizes with typical common lengths around 12’2” (3.7 m), widths of 4’3” (1.3 m), depths of around 2′ (. 61 m) Jon Boats are flat-bottomed boats with two or three bench seats ideal for fishing, hunting, or civilian protection during floods.
Can you use a Jon boat in salt water?
You Bet! Many saltwater anglers have made the switch back to aluminum Jon boats after “having a go” with bigger fiberglass vessels in previous years. Aluminum costs very little to operate and can go almost anywhere, given the right weather conditions.
Can you use an aluminum boat in the ocean?
Aluminum boats are an ideal way to spend the hot summer days out on the ocean The lightweight material and durability make them an attractive type of boat to have when enjoying the wide-open seas. However, it is important to note that special care must be given to aluminum boats used on saltwater.
How do I make my jon boat hold more weight?
Add flotation pods Because the stern houses the heaviest items on a jon boat like the gas tank, engine, and battery, you can add buoyancy to the boat by counteracting the weight on that side of the boat by adding flotation pods. The flotation pods should be added on the outside of the boat, one to each side of the aft.
How fast does a 5 hp boat motor go?
The 5hp engine will put you in the 10mph range , while the 7.50-10hp engines will push you 15+ mph.
How wide is a 14 foot Jon boat?
14 feet (4.3 m) long Jon boat This 60 to 70 inches (1.5 – 1.8 m) wide Jon boat comes with a bow decked area and two bench seats.
What is a jet Jon boat?
Jet jon boats (known as jet ski jon boat hybrids) have become more common on many rivers. These are unique and usually custom-built jon boats which are powered by jet drive They’re similar to, but much cheaper alternatives to jet ski boat conversions and jet boats.
Are Jon boats motorized?
Typically made of aluminum and powered by a small outboard motor , jon boats are lightweight and rugged, and can be found in service around the world for fishing and hunting, search-and-rescue, and as workboats.
References
https://www.grandviewoutdoors.com/fishing/top-6-reasons-to-own-a-12-foot-jon-boat