Insert one finger between the collar and your dog’s neck to check the tightness. The fit should be snug but not constricting. d. Allow your dog to wear the training collar for several minutes, then recheck the fit.
How do you reset a free spirit dog collar?
My remote and the receiver stopped pairing Then, press and hold the power button on the collar and the light on the collar should come on; continue to hold the button until this light goes out.
How do I sync my free spirit dog collar?
Add-A-Dog® Pairing Press and hold the on/off button. The LED light will turn on, then off in 4-5 seconds. After the training collar LED has turned off, release the on/off button. Press the Dog 1/2 button to select the correct setting for the training collar you would like to pair.
Is it cruel to use a training collar?
Despite what some trainers or
pet store employees
may say, shock collars are not safe or humane for your dog Fear, or pain-based training methods may have some short-term results, but they can also lead to other behaviour problems such as aggression, phobias and
high levels
of stress in your dog.
What is the best shock collar for dogs?
- The Best Shock Collar.
- SportDOG Shock Collar.
- PetSafe Shock Collar.
- Pet Spy Shock Collar.
- Petrainer Shock Collar.
- PESTON Remote Rechargeable & Waterproof Electric Shock Collar.
- Educator Shock Collar.
- Dogwidgets Shock Collar.
How do you activate the PetSafe collar?
The collar will automatically turn on whenever it is removed from the charger. To turn on the receiver collar when it is not on the charger, press and hold the mode button for 1 second (2B) Avoid touching the metal contact points. Next, the indicator light will flash green once and then go off for 1 second.
Why is my pet trainer collar not working?
Make sure your battery is charged in both the collar and the transmitter Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do I know if my shock collar is working?
- The receiver is working.
- The batteries are good.
- The wall-mounted transmitter is working.
- The dog should be getting shocked if it goes too far.
How does free spirit bark control work?
A
hands-free bark solution
for your best friend The Free Spirit Bark Collar is used to subdue excessive barking by emitting a shock correction that increases after each bark until the barking stops When your dog barks, the collar emits a shock correction at the lowest level.
How do you install free spirit in ground fence?
Design your boundary and position your transmitter. Lay out the boundary wire and test the system before burying the wire. Bury the boundary wire 1-3 inches deep and use the boundary markers as a temporary visual aid for your pet. Spend 1-2 weeks training your pet.
Do vets recommend shock collars?
The British Veterinary Association and the British Small Animal Veterinary Association both recommend “ against the use of electronic shock collars and other aversive methods for the training and containment of animals” and state that shocks “and other aversive stimuli received during training may not only be acutely.
Why you shouldn’t use a shock collar?
Shock collars can harm your dog The electrostatic shock can cause psychological distress for your pet, including phobias and high levels of stress, and can result in unhealthy increases in heart rate and painful burns to your dog’s skin.
Do vets recommend bark collars?
Anti-bark collars are punishment devices and are not recommended as a first choice for dealing with a barking problem. This is especially true for barking that’s motivated by fear, anxiety or compulsion.
What is a free spirit from pet products?
The Free Spirit® Remote Trainer can be used both to stop bad behaviors and teach your dog good behaviors. The trainer has tone (beep), vibration and 99 levels of shock. The remote be can paired with a second collar (sold separately), allowing owners to train two dogs.
Who is a free spirit?
Definition of free spirit : a person who thinks and acts in an uninhibited way without worrying about normal social rules : nonconformist Their daughter is a real free spirit.
Why is my bark collar not working?
The bark collar has not been fitted properly (very common) If the battery is flat, you simply need to recharge or replace the battery However, if the battery appeared to flatten too quickly we may need to look at things more closely. Often times a flat battery can relate to the most common problem.
How do I turn on my Innotek shock collar?
Insert batteries in the transmitter positive (+) side out. Before putting collar on dog, briefly touch the two
red paper dots
together to turn the collar on ON – A brief, solid green light and tone indicate that the collar is on, ready to use. A green light will blink while the collar is on.
Do shock collars cause brain damage?
Many ask, can shock collars cause brain damage to dogs? No, although they can make existing issues worse, brain damage is not a shock collar’s side effect.
Is a shock collar animal abuse?
Shock collars are often misused and can create fear, anxiety and aggression in your dog toward you or other animals. While they may suppress unwanted behavior, they do not teach a dog what you would like them to do instead and therefore should not be used.
Do shock collars make dogs aggressive?
The use of positive punishment in the form of choke collars, prong collars and shock collars can cause aggression This occurs because the anxiety and pain the dog feels when shocked or choked is often associated with whatever the dog was focusing on at that instant rather than their own behavior.
Do professional dog trainers use shock collars?
No. Not now, not ever You ONLY use this type of collar to keep the dog safe, NEVER to hurt them or to push them into submission. The other time I use remote collars is for the vibration function.
What is the difference between an e-collar and a shock collar?
There is almost no difference between an E-Collar and a shock collar, and the terms are used interchangeably, usually by those either opposing or promoting the use of these collars.
What is the button on the petsafe collar?
Press the button. The light will flash red. The number of flashes on the collar indicates the current collar level Press again quickly to increase the collar level.
How do I know if my petsafe collar is working?
Hold the collar probes against the wire on the test light tool. The collar will test all 15
stimulation levels
, causing the tool to flash at each level Important: The test light tool will have a dim flash when testing low levels. If a flash is not seen, hold the tool on the collar until higher levels are being tested.
Why is PetSafe collar blinking red?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet’s Computer Collar unit, your Power Cap battery may need to be replaced You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
Do you leave rubber tips on shock collar?
Do You Leave Rubber Tips On Shock Collar? It’s best to take off rubber tips on a shock collar The rubber can filter or prevent stimulation, therefore resulting in no shock stimulation.
How long do e collars last?
The batteries should last for a period of 3-5 years When a battery needs replacement, you can order a new pack by contacting us. Please do not open the Collar Receiver or Remote Transmitter until you have received the replacement.
How do you reset a pet trainer collar?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
Do shock collars work on stubborn dogs?
PetSpy’s P620 training collar is a great shock collar to encourage stubborn pups to act in the right way If the pup is being naughty and refusing to walk, the training collar will vibrate, beep, or shock the dog from up to 650 yards away.
What level should I set my shock collar?
With the Collar Receiver turned on and properly fitted to your dog, set the Remote Transmitter’s Intensity Dial at Level 1 and press the Continuous Stimulation Button for 1 to 2 seconds. If your dog shows no reaction to Level 1, go to Level 2 and repeat the process.
Can I test a shock collar on myself?
The easiest and safest route to testing the collar’s shock stimulation on yourself, is by simply placing your hand, arm or finger across BOTH contact points.
How do I sync my petsafe collar to my transmitter?
Put boundary switch on transmitter in the ‘high’ position. Turn the boundary control dial on the transmitter to position 4. Standing within 1.5 – 3 metres of the transmitter, re-insert the batteries into the receiver collar(s). Test the boundary by walking out into the safe zone until your receiver responds.
How do you use an Innotek shock collar?
- Step 1 Charging the Batteries. Plug the AC Adapter into a 110VAC outlet
- Step 3 Fit the Collar on Your Dog
- Step 4 Begin Training
- Step 2 Turning the Receiver ON and OFF
- Step 1 Install Transmitter Batteries and Charge Receiver
- Step 2 Turning the Receiver ON and OFF
- Step 3 Fit the Collar on Your Dog
- Step 4 Begin Training.
Citations
https://www.chewy.com/app/product-questions/190640
https://www.freespiritpetproducts.com/uploads/400-2118-1_Free_Spirit_Remote_Trainer_User_Manual.pdf