It uses a constant radio signal to create a “safe zone” Your dog’s collar picks up the signal and if he ventures out of the “safe zone”, he will hear a warning tone, followed by a light, static correction that s completely safe and humane.
How long do
petsafe transmitter
s last?
The Wireless Containment System unit can last up to approximately 10 years or more if used properly. Batteries on the collar can last and be replaced up to 1 to 2 months.
How does PetSafe wireless pet containment system work?
The system works by transmitting a radio signal up to 90 feet in all directions You temporarily define the Pet Area with Boundary Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and, once trained, is allowed to roam freely in the Pet Area.
How far does the PetSafe wireless fence go?
The
maximum range
is at least 90 ft on any of the PetSafe® Wireless Fence systems. It is recommended that you place the 2 transmitters no more than 150 ft.
How do I know if my PetSafe transmitter is working?
PetSafe fence transmitters usually have two indicator lights. The first is the power light, which tells you whether the transmitter is being powered properly and that the device itself is in working order. The second is the loop light, which tells you whether the fence wires make a full loop with the transmitter.
What is the best wireless fence for dogs?
- PetSafe Wireless Containment System – Best Overall. Check Price on Chewy
- PetSafe Basic In-Ground Fence System – Best Value. Check Price on Chewy
- PetSafe Stay & Play Wireless Fence – Premium Choice. Check Price on Chewy
- PetSafe Stay & Play Compact Wireless Fence. Check Price on Chewy.
Why does my PetSafe transmitter keep beeping?
Continuous beep – Signal failure alarm There is an internal problem with the base unit. Alarm lasts up to 30 minutes.
How can I keep my dog in the yard?
- Extend your fence. You don’t necessarily have to make it higher, but adding a section to the top that tilts inward will deter your dog
- Remove climbing aids
- Buy a coyote roller
- Add landscaping.
Are wireless dog fences effective?
Many people think an invisible underground wireless electric fence is the best way to keep their dog in their yard. However, they are simply not as effective as you might think. Statistics suggest that invisible wireless electric fences are only about 70% effective.
How do wireless invisible fences work?
The wireless dog fence involves installing the transmitter into centre of the property. From central transmitter a circular signal creates the no go zone around the garden Sounds simple enough, however, the downside is that property owner needs to consider several major facts when looking into wireless dog fencing.
How do I sync my petsafe collar to my transmitter?
Put boundary switch on transmitter in the ‘high’ position. Turn the boundary control dial on the transmitter to position 4. Standing within 1.5 – 3 metres of the transmitter, re-insert the batteries into the receiver collar(s). Test the boundary by walking out into the safe zone until your receiver responds.
What is the difference between PetSafe wireless fences?
What is the difference between the Petsafe Wireless Fence and the Stay and Play System? The PetSafe Stay + Play Wireless Fence works up to a range of 3/4 acre and has rechargeable batteries. The PetSafe Wireless Fence works up to a range of 1/2 acre and comes with a RFA-67D battery.
Why is the red light flashing on my PetSafe collar?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet’s Computer Collar unit, your Power Cap battery may need to be replaced You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
Why is my PetSafe wireless fence not working?
The light may come on and fade out. Place the battery back into the collar and twist to lock. Confirm that the collar powers on. If the collar does not power on, replace the battery with a new RFA-67 battery.
How long does a PetSafe rechargeable collar last?
Fully charged, the collar should last up to 3-week With 5 different levels of static correction, as well as a tone-only mode for training, this collar allows you to find the perfect fit for your pet. The collar is also compatible with the original PetSafe wireless pet containment system, pif-300.
How many collars can be on a PetSafe wireless fence?
You can add as many pets to your existing compatible wireless fence as you need. Just make sure each four-legged friend has their own PetSafe® wireless fence dog collar.
How much is an electric fence for dogs?
What’s the cost of an underground invisible electric dog fence? The typical cost to install an invisible dog fence is between $950 and $1500 There are many factors that contribute to the cost of your electric underground fence such as: the quality of the wiring.
Does PetSafe work with Invisible Fence?
Yes. Most of our receiver collars can be programmed to work with Invisible Fence® transmitters , as well as other electronic pet fencing brands.
How big of an area will a wireless dog fence cover?
A GPS fence for 1/2 acre to 1000’s of acres No boundary is too big! The SpotOn GPS Fence is a good solution if you need a large area wireless dog fence, as it works from 1/2 acre to 1000’s of acres. It is also fully portable and allows you to create up to ten customized fences.
Which wireless dog fence has the longest range?
Overall, FOCUSER Electric Wireless Dog Fence System has the longest range, covering an adjustable 1650 feet range in all directions (an equivalent of 6 acres).
How long do perimeter batteries last?
The
extreme dog fence replacement battery
is for use with all eXtreme Dog Fence systems and also Perimeter Technologies in-ground dog fence system receiver collars. These 6-volt batteries have a lifespan of about 2-4 months.
How do I connect my petsafe collar to my phone?
With the collar powered on, press and hold the button on the collar for two seconds to reconnect Bluetooth With Bluetooth reconnected, the collar will automatically reconnect to the app.
What does blinking green light mean on Invisible Fence?
When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.
How do you test an Invisible Fence transmitter?
Some invisible pet fences include a battery tester with the fence system. Place this on the collar and walk past the boundary wire. If the tester lights up and you hear the audible warning given by the collar, the battery is functioning properly If you hear the warning, but no light flashes, replace the battery.
Are electric dog fences cruel?
Myth: Invisible Fence makes dogs aggressive. False. People often ask if electric fences make dogs aggressive, and the answer is no Aggressive behavior is the result of poor training or misused correction levels.
How long does an Invisible Fence last?
How long does the Invisible Fence wire last? Invisible Fence boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground.
Do electric fences hurt dogs?
Hidden fences are safe for all dogs and cats, and they won’t hurt your pet The correction a dog receives from a dog fence or other “shock collar” is actually not a shock at all. Unlike the shock you feel when you touch a physical electric fence, the correction from a dog collar is generated by a battery.
Why is my transmitter beeping?
Rapid beeping usually indicates a broken wire, but on occasion, it indicates a bad transmitter Because the transmitter works by sending a current through a
closed loop
and checking to see if it comes back, you can do a short loop test to check your transmitter.
Why is my electric fence beeping?
Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather.
How deep can you bury petsafe wire?
Bury the wire Dig a narrow trench 1-3 inches deep The trench only needs to be as wide as the wire. Place the wire loosely into the trench to allow the wire to expand with temperature changes.
Does an invisible fence have to make a complete loop?
The answer is no, an electric fence DOES NOT have to make a complete loop However, there are advantages and disadvantages to completing the fence loop. Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions.
References
https://www.chewy.com/app/product-questions/48853
https://www.tractorsupply.com/tsc/product/petsafe-wireless-pet-containment-system
https://www.petsafe.net/media/manuals/pif-300-wireless-containment-system-manual.pdf