Most 14
ft jon boats
cost between $850-1,200.
How heavy is a 14 foot aluminum boat?
You can find some v-hull designs that are in the 150-pound range, which are reasonably easy to move around. But flat-bottomed jon boats tend to weigh more. Add in under-floor storage and a wider design and weights approaching 300 pounds are possible.
Are
aluminum boats worth
it?
Aluminum boats are more environmentally sustainable This makes
well-kept aluminum watercraft
command a higher resale value and will require less maintenance over their life span. Aluminum does not wear out or deteriorate over time, so that it can store its value for longer.
How much horsepower does a 12 foot aluminum boat need?
Maximum horsepower is based upon the size of your boat, with the range being around 3-5hp for small 10-12 foot boats, all the way up to 60-75hp for longer 18-20 foot Jon Boats. You should follow your boat manufacturer’s suggested horsepower for the specific size of your boat.
Why do they call a jon boat a jon boat?
Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.
Are jon boats worth it?
These are an excellent way to try your hand at fishing and boating without breaking the bank. If you do decide on a jon boat, you will find that it is one of the best ways to get started in fishing and boating Known for their flat, stable bottom, jon boats are an excellent way to have a fun day on the water.
What size motor do I need for a 14-foot boat?
Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.
How much does a 15 foot jon boat weight?
You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg).
How heavy is a 16 foot aluminum boat?
This puts the boat in the 16 to 20-foot
length range
. The weight on these boats is usually between 1,500 and 2,500 pounds without the motor With a larger engine and a trailer, you could be looking at a weight that is well over 5,000 pounds.
How long will an aluminum boat last?
Life Span. Boats made of aluminium clearly has the longest life span of the two. A very high material strength, good corrosion resistance, and other advantages of aluminum makes it possible for an aluminum boat to easily live 30-40 years This longevity also results in a low impairment and a high resale value.
What lasts longer fiberglass or aluminum?
Aluminum is more durable than fiberglass , which is prone to breaking or cracking from impact. Aluminum is more resistant to punctures also. Though sharp objects hit with enough force can puncture an
aluminum hull
, it is less likely to cause major damage.
What size motor do I need for a 15 foot boat?
15 to 25 HP engine 10 to 14 feet (3 – 4.5 m) long inflatable boat. 12 to 16 feet (3.65 – 5 m) long Jon boat, fiberglass boat, and aluminum fishing boat.
What size outboard do I need for a 15 foot boat?
15 – 25 hp (36kg-52kg) This hp range is quite popular for use with inflatable boats 10-14ft, aluminium fishing boats 12-16ft, jon boats 12-16ft in length, fibreglass boats 12-16ft in length. These hulls typically require a 15” short shaft length but may require a 20” shaft length as you approach 16ft in length.
What size motor do you need for a 16 foot aluminum boat?
An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.
What are the benefits of a jon boat?
- They Are Affordable. Jon boats are usually the most budget-friendly type of boat
- They Are Easy To Use. Some Jon boats are powered by a simple pair of oars
- They Are Easy To Transport. Jon boats are small and light
- They Are Versatile
- They Are Easy To Maintain.
How wide is a 14 foot aluminum boat?
14 feet (4.3 m) long Jon boat This 60 to 70 inches (1.5 – 1.8 m) wide Jon boat comes with a bow decked area and two bench seats. It is an excellent choice for fishing and recreation with friends.
How fast does a 5 hp boat motor go?
The 5hp engine will put you in the 10mph range , while the 7.50-10hp engines will push you 15+ mph.
How much does a 17 ft aluminum boat weight?
How Much Does a 17 Ft Boat Weigh? Depending on the boat type, between 1,150 lbs. and 2,221 lbs, not including a trailer.
Who makes the deepest jon boat?
SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.
Are aluminum boats hard to maintain?
They’re light, economical, nearly maintenance-free , easy to repair and almost impervious to damage. The Coast Guard and Navy prefer them for small craft, and many commercial boats are aluminum, as are many recreational craft.
Which is stronger fiberglass or aluminum?
Durability. Fiberglass is more durable and long-lasting than aluminum due to its superior weather-resistant nature.
Is aluminum or fiberglass better for saltwater?
Aluminum boats are generally lighter and require less hp to move it and pull it. Fiberglass is heavier and most of the time will provide a smoother ride. How you fish and what species you target are also deciding factors. Aluminum boat are perfectly fine in salt water.
How fast will a 25hp outboard go?
A 25hp Pontoon boat will not be very fast, with an expected maximum speed of between 5 and 10 mph Most commercially accessible pontoon boats tend to average between 18 and 25 mph, although there are a few very quick production boats on the marketplace, plus some altered ones that have recently set world records.
How fast will a 3.5 hp outboard go?
Question: How Fast will a 3.5HP Outboard Motor Go? Answer: A 3.5HP electric outboard motor can push a 12-foot boat with a load of 331 pounds at the most, with a speed of 5.6 MPH It can sufficiently push forward a 10-foot tender and it can work for a day sailer as an auxiliary power for up to 3,307 pounds.
How much weight can a 12ft jon boat hold?
An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load Thanks to a maximum of 5 to 7 HP, this vessel has a top speed of 10 to 15 mph (16 – 24 km/h).
How shallow can a jon boat run?
But the question remains… how shallow can a Jon boat run? Many boaters report being able to easily drive in water from 1-2 feet with their flat bottom Jon boats.
How long does an aluminum jon boat last?
Aluminum Jon boats are lightweight, but they possess incredible durability as aluminum is very strong. The durability of a Jon Boat will last up to 30 years or more without any significant degeneration or damage.
Are Jon boats good for saltwater?
Yes. As we have already discussed, it is possible to use a jon boat in saltwater so it is also possible to use your jon boat on the ocean. The question comes down to capability. Jon boats are flat bottom with very little keel or bow rise, even modified hulls have only a few feet of hull that is not flat.
What are the disadvantages of a jon boat?
- Rough Water. Most Jon Boats are going to have a relatively flat-bottomed hull shape instead of a more traditional V-shaped hull
- Leisure and Comfort. In fairness, leisure is fairly subjective from person to person
- Water Sports
- Need Size for Speed
- Engine Noise.
Can you stand up in a jon boat?
The jon boat flat bottom offers you stability when you stand You could wrestle your catch as hard as possible and your boat will not tip over, provided the weight in your boat is well distributed. That said, use sound judgment when standing in one of these boats.
Can you stand in a 12 foot jon boat?
No, it’s not as comfortable as standing on the carpeted decks of my Skeeter, but it works. When standing as high as possible is a fishing advantage, such as looking for shallow-water cruising bass during spring, one angler can stand on the seats of my 12-foot jon boat and still have decent stability.
Can you pull a tube with a 15 hp outboard?
Can you pull a tube with a 15 HP outboard? While it’s possible to tow a small child under 45lbs with a 15HP outboard engine , skiing behind a boat with such little engine power is typically challenging.
How fast can a 10 horsepower engine go?
Note: Many factors can affect the real-world performance of the 10 HP outboard motor, including the boat type, load, weather, battery type and capacity. That’s to say, with one single charge, you can go over 40 miles at 5 mph speed.
How fast will a 4.5 hp outboard go?
It will push your boat at 3.5. to 5 mph on a calm day Don’t expect it to push your boat into a wind.
How thick is an aluminum jon boat?
125-inch “sheet” aluminum hulls, the same thickness range and aluminum grade, 5052, as most aluminum fuel tanks. The plate aluminum boats we’re focusing on in the 20- to- 40-foot range might have hull plating from 3/16 to 1/4 inch thick , about twice as thick as the smaller boats just mentioned.
How much does a 16 ft Lund boat cost?
$13,059 * A fierce competitor on the water.
How much does a 16 foot Lund cost?
$16,897 * A fierce competitor on the water.
Does salt water damage aluminum boats?
Saltwater can and will corrode aluminum This does not mean that aluminum boats aren’t ideal for ocean use, but it does mean that they will need a little special attention. The way salt damages aluminum is a process called galvanic corrosion.
Will an aluminum boat rust?
Although aluminium boats are corrosion resistant , they are not corrosion proof, especially if a low-grade aluminium is used. Luckily, there are a variety of ways to prevent and protect your boat from the effects of oxidation and corrosion.
How do you stop electrolysis in aluminium boats?
- Ensure all underwater appendages such as heat exchangers, propellers, stern drives, struts and outlet pipes are all correctly earthed.
- Ensure any sacrificial blocks are the correct type, applied in the correct quantity and in the correct position on the hull.
Citations
http://www.backwoodslanding.com/15ft.html
https://www.boatguide.com/how-to/how-to-buy-a-14-foot-boat
How Much Does a Jon Boat Cost? (With Examples by Boat Length)