Most 14
ft jon boats
cost between $850-1,200 which is similar to the 12ft models. More expensive packages may also be available and will include trailer, engine and sometimes basic safety equipment. The 14ft jon boat is the best, and worst, of two worlds.
Is a 12 foot jon boat big enough?
A 12-foot jon boat is perfect for teaching young anglers how to fish You can access
small unpressured waters
, and because you’re sitting close to each other (unlike in a canoe), it’s easy to help them with gear problems, and take pics of a big fish before letting it go.
How fast will a 14 foot jon boat go?
14 Foot Jon Boat Speed You can expect 20-25mph out of your 14-footer. This boat length will generally allow for a 15-20hp engine, with some permitting up to 25hp motors.
How much weight will a 14 foot jon boat hold?
A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear.
Are jon boats worth it?
These are an excellent way to try your hand at fishing and boating without breaking the bank. If you do decide on a jon boat, you will find that it is one of the best ways to get started in fishing and boating Known for their flat, stable bottom, jon boats are an excellent way to have a fun day on the water.
How big of a motor can I put on a 12 foot jon boat?
12-foot jon boats have an
average weight capacity
of 420 pounds and an average maximum horsepower of about 5 to 7 HP , however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.
What is the most popular size jon boat?
Jon Boats are commercially produced between 8 and 20 feet in length (though sometimes longer), with the most
common sizes
being 10-16 feet long.
How many people can you put in a 14ft jon boat?
14 feet (4.3 m) long Jon boat The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
What is the biggest motor you can put on a 14ft jon boat?
Re: What is Largest Motor I should put on 14′ Jon Boat You don’t need anything larger than 25 hp.
How long do Jon boats last?
But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.
Can you put a motor on a jon boat?
Yes, you can absolutely run a jon boat with a trolling motor , either as your main propulsion, or as a secondary propulsion with a gasoline outboard as your main engine. However, there are several things you need to consider before you decide which of these two options is right for you.
What size motor do you need for a 16 foot aluminum boat?
An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.
How wide is a 14 ft jon boat?
How wide is a 14-foot Jon boat? Around 57 to 70 inches on average This size takes the leap by allowing you to take two more people along with you.
What are the benefits of a jon boat?
- They Are Affordable. Jon boats are usually the most budget-friendly type of boat
- They Are Easy To Use. Some Jon boats are powered by a simple pair of oars
- They Are Easy To Transport. Jon boats are small and light
- They Are Versatile
- They Are Easy To Maintain.
What is a 1448 jon boat?
Lund® Jon Boat 1448: 13ft Aluminum Utility Hunting & Fishing Boat.
Can you stand up in a jon boat?
The jon boat flat bottom offers you stability when you stand You could wrestle your catch as hard as possible and your boat will not tip over, provided the weight in your boat is well distributed. That said, use sound judgment when standing in one of these boats.
How do I make my jon boat hold more weight?
add flotation pods
Because the stern houses the heaviest items on a jon boat like the gas tank, engine, and battery, you can add buoyancy to the boat by counteracting the weight on that side of the boat by adding flotation pods. The flotation pods should be added on the outside of the boat, one to each side of the aft.
Does adding foam to a boat help it float?
Flotation foam can be an important addition for sink-proofing, thermal insulation, and soundproofing such boats as sailboats, jon boats, aluminum v-hull fishing boats, speed boats, canoes, bass boats, and pontoon boats. It can also help keep floating docks riding higher in the water when loaded down with weight.
How fast does a 9.9 Johnson go?
This is a stock 1975 Johnson 9.9 on an 11′ inflatable boat. The propeller is 9 1/4″ diameter x 8″ pitch. (Stock is 9 1/4″ x 10″) Top speed is 20 mph on the GPS.
What is the widest jon boat?
SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.
How deep are Jon boats?
Jon Boats are available in a range of sizes with typical common lengths around 12’2” (3.7 m), widths of 4’3” (1.3 m), depths of around 2′ (. 61 m) Jon Boats are flat-bottomed boats with two or three bench seats ideal for fishing, hunting, or civilian protection during floods.
What are the different types of jon boats?
Jon boats come in two types- the classic flat-bottom hull and the modified V-hull designed for performance So without further ado, let’s jump aboard and discuss the design, advantages, and environments for these boats that are notorious amongst anglers, utility workers, and leisure seekers alike.
Why is it called a jon boat?
Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.
Can you use a jon boat in the ocean?
Jon boats can be taken out into the ocean but must be done so with caution Boats shorter than 16 feet in length present a significant hazard on the open water due to stability and power rating.
What are the disadvantages of a jon boat?
- Rough Water. Most Jon Boats are going to have a relatively flat-bottomed hull shape instead of a more traditional V-shaped hull
- Leisure and Comfort. In fairness, leisure is fairly subjective from person to person
- Water Sports
- Need Size for Speed
- Engine Noise.
Can you put a jon boat on top of a car?
You can put a jon boat on top of a car as long as your car’s towing capacity is sufficient to handle the weight of a jon boat and you use the necessary equipment to attach it to your car, including tie-down straps and a roof rack.
What are flat bottom jon boats good for?
Jon boats are essentially flat-bottomed, utility boats. They are used for a variety of different tasks, from hunting to fishing to collecting lumber Because of the flat shape of the hull, Jon boats tend to sit on top of the water as opposed to cruising through it.
Can you put a 15 hp motor on a 12 foot jon boat?
A 15hp on a 12′ boat may porpoise, or (worse) cause the bow to dig in as the hull is sucked downwards from excess speed (Yes, this happens). If you DO go with this size engine, avoid running it at WOT unless you have some extra weight in the boat.
What is the max HP for a 12 foot aluminum boat?
Maximum horsepower is based upon the size of your boat, with the range being around 3-5hp for small 10-12 foot boats, all the way up to 60-75hp for longer 18-20 foot Jon Boats. You should follow your boat manufacturer’s suggested horsepower for the specific size of your boat.
How fast will a 3.5 hp outboard go?
Question: How Fast will a 3.5HP Outboard Motor Go? Answer: A 3.5HP electric outboard motor can push a 12-foot boat with a load of 331 pounds at the most, with a speed of 5.6 MPH It can sufficiently push forward a 10-foot tender and it can work for a day sailer as an auxiliary power for up to 3,307 pounds.
Are jon boats durable?
Thanks to its basic layout combined with a flat-bottomed hull and a durable aluminum construction , they are the ideal vessel for navigating in shallow and muddy waters. Jon Boats are cheap and easily found used on places like Craigslist too.
How heavy is a 12ft jon boat?
Here are the jon boat weight averages by length: 10 Foot: 100 pounds (45 kg) 12 Foot: 150 pounds (68 kg).
How wide is a 16 ft jon boat?
Jon boats sold commercially vary in width related to their length. 8-foot jon boats average 32 inches; 10-12 foot boats average 34-40 inches; 14-16 foot boats average 42-50 inches , and 18+ foot jon boats can be up to 60 inches wide.
What happens if your boat doesn’t have a capacity plate?
Even without a capacity plate, you can calculate the safe load weight for your boat For mono-hull boats which measure fewer than 20 feet, you can use the length of the boat and multiply it by the boat’s width. Then divide that number by 15 to determine how many passengers you can safely carry.
How much HP does a 14ft boat need?
It depends on the boat. Some 14’s are wide and deep and could handle a 25 while others are narrow and shallow and would be scary at any higher speed or even sitting still with all that weight. A 15 hp is a good compromise, same weight as a 9.9 and enough speed.
How fast does 40 hp go?
A 40hp Pontoon boat with an average load of people can expect to reach speeds of around 10 – 15 mph A lot depends on the size of the pontoon boat, how many people are on it, and the weather conditions.
How can I make my 15 hp outboard faster?
Change the propeller on the outboard If you are looking to get the top speed out of your motor, select a propeller that has a higher pitch. This will slow the acceleration of the motor but the overall top speed will increase. If you are looking for faster acceleration, decrease the pitch.
References
https://www.boattrader.com/boats/type-power/class-power-jon/
https://www.boats.com/boats-for-sale/?class=power-jon
https://www.ebay.com/b/Fishing-Boats/63723/bn_2313563
https://www.loweboats.com/hunt-fish/jon.html