How Much Is A New 14 Ft Jon Boat?

Most 14ft jon boats cost between $850-1,200 which is similar to the 12ft models. More expensive packages may also be available and will include trailer, engine and sometimes basic safety equipment. The 14ft jon boat is the best, and worst, of two worlds.

How fast will a 14 foot jon boat go?

14 Foot Jon Boat Speed You can expect 20-25mph out of your 14-footer. This boat length will generally allow for a 15-20hp engine, with some permitting up to 25hp motors.

How many people fit on a 14 foot jon?

An average 160 pounds (72.5 kg) heavy and 14 feet (4.3 m) long Jon boat without an engine can hold 610 pounds (277 kg) of gear and passenger. The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.

Are

tracker boats

welded or riveted?

Tracker aluminum boats are welded rather than riveted It is generally accepted that riveted seams are more likely to develop leaks but are far easier to repair than welded seams. Tracker uses lasers for the precision fabrication of

aluminum parts

.

Are jon boats worth it?

These are an

excellent way

to try your hand at fishing and boating without breaking the bank. If you do decide on a jon boat, you will find that it is one of the best ways to get started in fishing and boating Known for their flat, stable bottom, jon boats are an excellent way to have a fun day on the water.

What is the biggest motor you can put on a 14ft jon boat?

Re: What is Largest Motor I should put on 14′ Jon Boat You don’t need anything larger than 25 hp.

How much does a 14ft jon boat weigh?

A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear.

How long do Jon boats last?

But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.

What is a 14-foot boat good for?

For many, it’s also the only boat they ever need, so versatile is its design. With simple bench seats, a durable aluminum hull and virtually zero maintenance requirements, the 14-foot tinnie does it all – fishing, duck hunting, or just going for an after-dinner ice cream.

What are Jon boats good for?

Jon boats are essentially flat-bottomed,

utility boats

. They are used for a variety of different tasks, from hunting to fishing to collecting lumber Because of the flat shape of the hull, Jon boats tend to sit on top of the water as opposed to cruising through it.

How much does a 14

ft aluminum boat

weigh?

Smaller aluminum fishing boats typically weigh around 400 pounds and a 14 feet cabin cruisers will often weigh around 14,000 pounds.

Can you stand up in a jon boat?

With a jon boat, you can cruise through lots of obstacles to get to any of your fishing spots. And this is especially useful when fishing for bass or other fish which like to hide away from open water in protected, often over-grown, back coves. The jon boat flat bottom offers you stability when you stand.

Do Tracker jon boats come with trailers?

Except for TOPPER™ non-package jon boats, every TRACKER® Mod V, Deep V and GRIZZLY® model comes standard with a custom-fit trailer.

Where are TRACKER Boats made?

BOLIVAR, Missouri – The first Bass Buggy 16 Pontoon Boat has rolled off the line at the newly expanded TRACKER Boats manufacturing facility in Bolivar, marking a new era in the production of America’s favorite boat brands.

Are TRACKER Boats all aluminum?

TRACKER® hulls and interior structures are made from the toughest boat aluminum of all : 5052 H34 marine-grade alloy with magnesium for corrosion resistance.

Can you take a jon boat in the ocean?

Jon boats can be taken out into the ocean but must be done so with caution Boats shorter than 16 feet in length present a significant hazard on the open water due to stability and power rating.

Is 25 mph fast for a boat?

A middle-of-the-road option in terms of average pontoon boat speed is the 21-foot Triton pontoon boat and its 90 HP engine. This boat’s combination of speed and strength gives it a top boat speed of around 25 MPH even when you have a few friends aboard weighing it down.

How much horsepower does a jon boat need?

Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.

How can I make my jon boat faster?

  • 3 Ways to Make a Boat Faster. Reduce weight
  • Reduce Weight. Reducing weight is like finding free horsepower, and many boat owners are surprised how much weight they can leave on the dock
  • Don’t Over-Trim
  • Change Your Propeller.

Does adding foam to a boat help it float?

Flotation foam can be an important addition for sink-proofing, thermal insulation, and soundproofing such boats as sailboats, jon boats, aluminum v-hull fishing boats, speed boats, canoes, bass boats, and pontoon boats. It can also help keep floating docks riding higher in the water when loaded down with weight.

What is the smallest jon boat?

8 feet (2.5 m) long Jon boat This Jon boat has the smallest size with a minimal weight capacity. It is practical for one passenger but unstable, making it inadequate for deep waters. Crew – One adult with light gear; an adult and a kid.

How big is a 1232 jon boat?

Alumacraft 1232 JON is a 3.60 meters aluminium boat with accommodation for 2 people and the draft of 0.30 meters. The powerboat with aluminum hull has CE certification class (D) and can go in protected waters.

How much does a tracker 1436 weigh?

Transom height: 15.5 in. Draft: 5.12 in. Average dry weight: 162 lb. Average package weight: 314 lb.

What is a 1448 jon boat?

Overview. The all-purpose, all-welded TRACKER® GRIZZLY® 1448 Jon is a tough, nimble and affordable aluminum jon boat The deep, roomy interior leaves plenty of room for fishing tackle or duck decoys, and 2 seat bases accept a variety of seating options. GRIZZLY jon boats have a thick,.

Why is it called a Jon boat?

Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.

Who is TRACKER Boats owned by?

Today, White River Marine Group owns and manufactures TRACKER Boats as a part of a larger family of quality boat brands. Our commitments are the same from that very first BASS TRACKER.

How do I make my Jon boat more sturdy?

Adding buoyancy to your Jon boat means enhancing its floating ability in the water, which improves the stability of the boat. Buoyancy helps decrease the effect of the heavy load on the boat.

What are the disadvantages of a jon boat?

  • Rough Water. Most Jon Boats are going to have a relatively flat-bottomed hull shape instead of a more traditional V-shaped hull
  • Leisure and Comfort. In fairness, leisure is fairly subjective from person to person
  • Water Sports
  • Need Size for Speed
  • Engine Noise.

What size waves can a jon boat take?

While they will be less stable and less smooth than most boats with a v-shaped hull, Jon Boats can reasonably handle most rough water with wave heights of up to 4 feet.

How much HP does a 14ft boat need?

It depends on the boat. Some 14’s are wide and deep and could handle a 25 while others are narrow and shallow and would be scary at any higher speed or even sitting still with all that weight. A 15 hp is a good compromise, same weight as a 9.9 and enough speed.

What is the max HP for a 14 foot aluminum boat?

14 foot Jon Boats average a maximum horsepower of 15-20hp but some will fall outside of that range based on the specific boat.

How fast will a 3.5 hp outboard go?

Question: How Fast will a 3.5HP Outboard Motor Go? Answer: A 3.5HP electric outboard motor can push a 12-foot boat with a load of 331 pounds at the most, with a speed of 5.6 MPH It can sufficiently push forward a 10-foot tender and it can work for a day sailer as an auxiliary power for up to 3,307 pounds.

How do I make my jon boat hold more weight?

Add flotation pods Because the stern houses the heaviest items on a jon boat like the gas tank, engine, and battery, you can add buoyancy to the boat by counteracting the weight on that side of the boat by adding flotation pods. The flotation pods should be added on the outside of the boat, one to each side of the aft.

How do you size a jon boat?

What sized jon boat is right for your needs? 8-12 foot boats work great for small area-exploration. 14-16 foot jon boats work great for water sports and utility work. 18+ foot boats are for utility and commercial use.

How much does a 14ft jon boat and trailer weigh?

14 Foot Jon Boat Weight: Average weight of 275 pounds (125kg) which is based on an average hull weight of 160 pounds (73kg) and average 15hp engine weight of 115 pounds (52kg). Sample Size: Waco Jon 1432 Series 14 Foot: 104 pounds (47kg).

Do riveted boats leak?

Rivets leak because wear and tear eventually loosens them , causing gaps where water can get through. There are a couple of ways to find leaking rivets.

How much water does a jon boat need?

Many boaters report being able to easily drive in water from 1-2 feet with their flat bottom Jon boats. Jon boats are specifically built to operate in shallow water, but how shallow is going to depend on two main things: your hull draft and your motor shaft length.

Is a 12 foot jon boat big enough?

A 12-foot jon boat is perfect for teaching young anglers how to fish You can access small unpressured waters, and because you’re sitting close to each other (unlike in a canoe), it’s easy to help them with gear problems, and take pics of a big fish before letting it go.

How many square feet is a 14 foot jon boat?

Conservatively, 14 x 6 x 85 (the bottom profile is calculated like bottom paint) = 71.4 sq ft Then conservatively, each side would be about 14′ x 16″ (yes, it flares and tapers—this is just a rough estimate) = 16.3 sq.

References


https://www.bassproboatingcenters.com/boats-for-sale/boatmodel/2020+tracker+topper+1542+riveted+jon-7262357.html

How Much Does a Jon Boat Cost? (With Examples by Boat Length)




https://www.boattrader.com/boats/make-tracker/model-topper-1436/