Line Capacity Mono (yds/lb): 50/600 Line Capacity Braid (yds/lb): 80/1135, 100/930, 150/865.
What is the difference between tiagra 50WA and 50wlrsa?
the only difference in the 2 reels is the
drag curve
on the LRSA is steeper and more similar to the 80 The 50 WLRS/A has an 80 # drag, the SAME drag found in the 80W Tiagra. The Tiagra 50 has a 50# drag.
How much line does a Tiagra 80W hold?
Line Capacity Mono (yds/lb): 80/950 Line Capacity Braid (yds/lb): 100/2445, 150/2365, 200/1920. Max Drag (lbs): 35 lbs Strike/44 lbs Drag.
How much line does a 50W hold?
The reel will hold. Line Capacity – Mono: 550 yds./80 lb. Line Capacity – Braid: 1575 yds./80 lb., 1235 yds./100 lb., 1180 yds./150 lb.
How much drag does a tiagra 130 have?
The Shimano Tiagra® TI130A has long been used by commercial fishermen and charter captains. It is the flagship from the
shimano tiagra series
this reel is huge and it was designed to catch
big fish
, really big fish! It has a staggering 99 lbs of drag and the stopping power to land anything in the ocean.
What does LRSA stand for Shimano?
The LRS (
long range special
) has a higher drag curve designed for the So Cal guys catching big tuna from a dead boat. Here’s a post about the Tiagra 50wlrs, which I would imagine shares similar upgraded drag. Tiagra 50WA vs 50W LRSA – The Hull Truth. That’s what I read about them in the past anyway.
How much drag is enough?
The rule of thumb for drag setting is 30% (or 1/3) of the line breaking strength So for example, if you are using a 15 lb test line, then the optimal drag for your reel should be around 5 pounds.
What should my drag be set to?
According to traditional theory, drags should be set to between one quarter and one third of the line’s rated breaking strength.
How much drag do you need for inshore fishing?
Since the line I use for inshore fishing is 10 lbs, the recommended range is 2 to 3 lbs So I was pleased to see that my time-tested drag setting is 2.3 lbs, which is in the middle of the recommended range.
Why is drag important in fishing?
The drag is simply a pair of friction plates inside of fishing reels. If the fish pulls on the line hard enough, the friction is overcome, and the reel rotates backwards, letting line out, preventing the line from breaking You want to set the drag on a fishing reel before your first cast of the day.
What does Max drag mean?
Max drag is measured when the line is loaded to maximum on the spool In the actual fight, your line is out of the spool for the depth where the fish is. Your line load is less in diameter. Your spool is harder to be dragged to turn.
What does LRS stand for Shimano?
The LRS stands for Long Range Special (I believe..not a Shimano conventional reel guy myself) and it generally means it has a higher drag curve than the standard drag for the size reel. So a 50WLRS reel will have the equivalent drag of the Shimano 80 reel.
How much drag do you need for king salmon?
For salmon most reels have 11lbs or greater drag.
How much drag do you need to catch a shark?
A reel with at least 25 pounds of
maximum drag capacity
is necessary for sharks over 100 pounds Smaller sharks will require reels with 15 to 20 pounds of maximum drag pressure.
How hard can a fish pull?
fish can absolutely apply 6-8 lbs of force to the line. If you’re fishing light line, you’ll want to make sure your drag is set properly and you’re fishing an area where the fish has some room to run without running the risk of burying himself in weeds or wrapping you around branches.
How much drag do I need for a 30lb line?
Setting the Drag for Braided Line But the cushion against sudden spikes in tension is nonexistent, so lighter drag settings are in order. With braided lines up to 20-pound-test, set the drag at 15 percent of the line’s breaking strength. With 30- through 65-pound braid, set it at 20 percent.
What size reel is best for inshore fishing?
Inshore Fishing Reels An open-faced saltwater spinning reel ( 2000 to 3000 series ) with corrosion-resistant components is the most effective choice for saltwater inshore fishing. Opt for a reel that has approximately 150 to 200 yards of line capacity when using 10 to 15-pound braid.
What is the best line for inshore fishing?
Your got to have leader material for inshore fishing should be 30 pound tested leader made of fluorocarbon or monofilament The reason for this is that it refracts beneath the water, meaning it’s almost invisible to fish.
What is the best bait for inshore saltwater fishing?
Shrimp are definitely one of the best saltwater baits out there Shirmp Lures not only are they a favorite meal of saltwater fish, but you can also use shrimp as saltwater bait when you’re fishing from a bridge, pier, bank or boat. Different-size fish will hit on different-size shrimp.
Sources
https://www.tackledirect.com/ti50wlrsa.html
https://www.basspro.com/shop/en/shimano-tiagra-conventional-two-speed-saltwater-reel