In-Depth guide to What Is The Difference Between A 7 And 7FC Blade

In the following article on my site, I’m going to discuss the subject that is titled “What Is The Difference Between A 7 And 7FC Blade?.” I will provide you with all of the pertinent information that pertains to the topic. I have high hopes that you will find this essay to be really helpful.

What is the difference between a 7 blade and a 7F blade?


When a blade such as a size 7 doesn’t have an F behind the number , this is referred to as a

skip tooth blade

where every other tooth on the comb is shorter. The idea of this blade is for rapid removal of

thick dense fur

but will require going over again with a F blade for a

smoother finish

if required.

What does 7FC stand for?

Blades come in 2 types, FC or ST. ST means Skip Tooth. F or FC means Finish Cut or Fine Cut F and FC mean the same thing (so a 7F and a 7FC mean the same).

Size Blade: What size blade should I use to groom my dog

Top Blades for New Dog Groomers #10 blade is a good choice for sanitary prep #5 or #7 blades work well on mats. #15 blade is generally suitable for pads. #7 blade may be best for

body work


What is a 4FC blade used for?


Size 4FC Finish Blade: Has a 3/8″

blade cut

(9.5 mm) most often used for a finish that most closely resembles hand scissoring Blade of choice for a short clip on a mixed breed, such as a Lhasa, Shih Tzu, Yorki, or Maltese Carburized hardening process delivers the longest lasting, smoothest cutting blades.

Clipper Blades: What does HT mean on clipper blades

High taper (HT) blades are great for blending

different lengths

and will leave more hair than a standard blade.

7F Blade: What is a 7F blade in MM

Product Description. Oster No 7F dog grooming clipper blade leaves 3.2mm of hair. This is a finishing clipper blade for the No 7 Skip tooth and also works well on unmatted dog coats. The Oster Cryogen-X A5 snap-on range of blades are of superior quality by a

well-known brand

and used by many professional dog groomers.

What size blade do you use on a goldendoodle?


Use you

dog clippers

and a #10 blade to trim your dog’s belly, behind, and under the ears. Doing a maintenance trim will help decrease the frequency of your doodle’s grooming appointments, so the dog clippers will quickly pay for themselves.

Teddy Bear: What is teddy bear cut

The teddy bear cut is a Poodle or Doodle cut in which the hair is kept at about 1-2 inches long at all parts of the dog’s body, including the face Traditional Poodle cuts have the face shaved closely to the skin. If shaved, the face looks more serious, regal and show-dog like.

5F Dog: What is 5F dog grooming

Oster No 5F dog grooming clipper blade leaves 6.3mm of hair. This clipper blade is a finish blade for the no 5 blade The Oster Cryogen-X A5 snap-on range of blades are of superior quality by a well-known brand and used by many professional dog groomers.

What is a #10 blade for grooming?


#10 blades are ideal for very short summer haircuts and for clipping inside the ears, around the backside and under the hind legs of any breed These areas should stay short to promote good hygiene and prevent matting between grooming sessions in harder to access areas.

What blade do you use to groom a poodle?


The most popular clipper blades for the Poodle coat depend on the look you want to achieve. The 10 (and the 15 if you don’t have trimmers) – and body lengths 3, 4, 5 and 7 – are the most popular blades. There are longer (and shorter)

options available


Clipper Blade: How long is a 4FC clipper blade

Product Description. The Andis PEt Ultra Edge Size 4FC leaves hair 3/8-inch This blade Fits Andis model AG, AGP, AGR Plus, AGCL, AGRC and MBG models.

What length is a 40 blade?


The surgical #40 blade provides a 3/128-inch (0. 6mm) cut length; operates 2.

Clipper Blades: What is the difference between clipper blades and clipper combs

Plastic combs are affordable, durable, and easy to use, but may require multiple passes over the coat to achieve the desired cut. Stainless steel blades are more costly, but slide through the coat easier and require fewer passes to achieve a smooth finish.

What blades to use on a Yorkie?


A No. 4 blade is ideal for a puppy cut on a Yorkie. It leaves the hair about an inch long, and you can use it on all of the Yorkie’s body, except the head and feet.

What is a kennel cut?


Kennel cuts are 1/2″ or shorter, their ears are left long, and trimmed to give them a “puppy face” Teddy bears are a 1/2″ or longer (but never longer than 2″), and the face is left longer. A breed trim is left long, but a skirt is cut out so their hair doesn’t drag on the floor.

Dog Clippers: Why do my dog Clippers keep jamming

If your blade or comb attachment gets clogged with fur as you clip , it won’t be able to cut properly, even if the blade is sharp and the clipper motor has enough power to handle the dog’s coat type. Before you clip it’s important to remove stuck, dead coat.

Whats the difference between 5F and 5 blade?


#5 or #7 are skip tooth blades designed for cutting fur quickly with little combing out first. #5F and #7F are finer tooth blades to be used to smooth out the rougher cut left by the first blades mentioned.

Blade Cut: Does a #7 or 10 blade cut shorter

In grooming equipment, blade numbers go backwards from what you would expect. That is, the smaller the number, the longer the hair will be, and the bigger the number, the shorter the hair will be. So short haircuts will be a #5, #7, #9, #10 (named longest to shortest).

Dogs Hair: How short should I cut my dogs hair

For example, if you want to leave only 3/8 of an inch of hair on your dog’s stomach, use a finishing/full-cut size 4 blade If you want to leave one inch of hair on his entire body, use a wide/T-blade in size 3 and cut in the direction of the hair’s growth.

Wahl Blades Fit Andis Clippers: Do Wahl blades fit Andis clippers

If your clipper is an A5 model, it will fit any brand of standard blade, in any length. So you can get Wahl blades for your Andis clippers , Andis blades for your Heiniger clippers and so on, provided the blade and the clippers are both A5 (also called standard or universal).

Ceramic Clipper Blades: Do you oil Ceramic clipper blades

Oil is also very important with ceramic blades Remember, ceramic sharpens steel, so letting the ceramic cutter dry out by either not oiling or spraying coolants, will dull the cutting edges of the bottom blade. We all know they run cooler, but oiling is still very very important.

Tooth Blade: What is the difference between a skip tooth blade and a finish blade

The larger blades sizes (#7 down to #3-3/4) come in both Skip Tooth and Finish Cut styles and the main reason is because the Finish Cut blades sometimes have a hard time cutting through thicker coats and mats, but the Skip Tooth blades will cut through them easier.

Skip Blade: What is a skip blade

Skip Tooth Blade Leaves the same length of hair but has alternative short and long teeth Designed to leave a more textured, rough finish Can go through coarser coats easier. Great to use on matted coats (you will find using a skip tooth will not blunt your blade as quickly).

Kennel Dryer: Which breeds should never use a kennel dryer

For example, brachycephalic dogs—breeds with short muzzles such as pugs, shih tzus and bulldogs —should not be cage dried. Very young or very old dogs should be carefully monitored if heated dryers are used, as should very anxious dogs.

What is a fall in dog grooming?


In the fall, dogs shed more heavily to get rid of the summer coat and make room for a winter coat , so take advantage of this time to banish discolored hair. Frequent brushing will also distribute coat oils, making the hair look healthier and shinier.


Which blade do I need for my dog?

Andis 7FC Blade