For
bass fishing
, use 8 to 12
pound test monofilament
or
fluorocarbon line
with finesse presentations using spinning gear Bump it up to 15 or 20 pound test in heavy cover. When casting big swimbaits, crankbaits, jigs and topwater tackle, a braided main line in the 30-50 pound test range is incredibly versatile.
What is the strongest fluorocarbon line?
Seaguar Abrazx 100% Fluorocarbon The strong line boasts exceptional impact and knot strength besides being incredibly soft and sensitive to the slightest action. Like all 100% fluoro products, the AbrazX is also invisible to fish when it goes underwater.
Does heavier fluorocarbon sink faster?
Also boosting sensitivity,
fluoro sinks
faster than mono , resulting in less slack or bow between the lure and rodtip. Toughness—Fluorocarbon is more abrasion resistant than standard nylon monofilament of the same diameter.
What is the strongest fluorocarbon knot?
The Palomar knot is one of the strongest and most reliable fishing knots, plus it’s easy to tie and performs well with most line types. Professional bass angler Bob Downey uses the Palomar knot almost exclusively with fluorocarbon fishing line but stresses the need to tie it correctly to avoid failure.
What line do pro bass fishermen use?
Most professional anglers today use very little monofilament line About the only time I’ll choose monofilament to fish for bass is if I’m fishing a spinner bait or a bladed jig or cranking very heavy wood with a square-billed crankbait and making short casts.
Who makes the strongest fluorocarbon line?
Seaguar Blue Label
fluorocarbon leader
This has been the most dependable line with superior strength and ease of use (as far as fluorocarbon goes). It’s 100% fluorocarbon and is invisible underwater.
Is pink fluorocarbon better than clear?
MYTH: Pink fluorocarbon will disappear just as well as clear. FACT: No. Actually adding color to 100% fluorocarbon makes it weaker , as the dye pigments mix with the fluorocarbon resins.
Is fluorocarbon good for flipping?
Brandon suggests using 20-25 lb Seaguar Flippin’ Fluorocarbon Line. Designed by flipping guru, Denny Brauer, the Seaguar Flippin’ Fluorocarbon Line delivers best-in-class strength, while maintaining the invisibility of fluorocarbon, making it the perfect choice for pitching and flipping in clear conditions.
Does fluorocarbon cast further than mono?
Casting distance, fluoro is way behind the other two for me while mono casts better than braid when comparing similar diameters, although you’re usually getting 4x the breaking strength from the braid, so it’s pretty easy to go down a size or two to gain extra distance.
What is the best fluorocarbon line for bass fishing?
- Seaguar Tatsu. Superb. 354.
- Seaguar InvizX. Superb. 1362.
- Sunline Super FC Sniper. Superb. 719.
- Seaguar Basix. Superb
- Seaguar AbrazX. Superb. 700.
Why does my fluorocarbon keep breaking?
A couple of points to note on fluorocarbon line; ensure you moisten the line thoroughly when cinching the knot down, and also if you get a backlash and kink the line, the kink will be a weak spot prone to breaking.
What is the best fishing knot for fluorocarbon line?
So, what is the best knot for fluorocarbon? Sunline recommends using the Tornado HH Knot We recommend this knot for fluorocarbon because the knot strength of the Tornado HH knot is nearly 100 % of straight strength. Meaning the knot has the same tensile strength as the line.
Is fluorocarbon stronger than mono?
In the short term, fluorocarbon is a much harder material than monofilament This results in higher abrasion resistance that is useful in situations such as nymphing or fishing around heavy structure. Also, most fluorocarbon line is thinner in diameter than monofilament line of the same breaking strength.
Is 10 pound line good for bass fishing?
Beginner Bass Fishing Rods, Reels, & Line To start, try spooling 6-10lb monofilament or fluorocarbon to your spinning combo. For baitcasting gear, beef up to between 10-20lb for clear line and use between 30-40lb braided line. Monofilament is the cheapest, and fluorocarbon is the clearest in the water.
Is fluorocarbon good for Baitcasters?
With modern braid and mono fishing lines, the truth is that it can be hard to go wrong. Even a spool full of fluoro, although often not ideal, will work well enough on a baitcaster.
What fishing line is invisible to fish?
Fluorocarbon is the line that is most invisible underwater , while the braided line is the strongest, yet most visible above water. The same can be said about highly visible colors such as yellow and red.
Does fluorocarbon line sink or float?
Fluorocarbon is denser with fewer air bubbles trapped in it, giving it a negative buoyancy It sinks faster than traditional monofilament, making fluoro great for nymph fishing because it will help your flies drop quickly through the water column.
Does fluorocarbon have backlash?
Fluorocarbon fishing line has a reputation for backlashing or birdnesting when casting bait casters and spinner reels Fluorocarbon is made from PVDF, which creates a lot of line memory that contributes to backlashes.
Can you use fluorocarbon as a main line?
Fluorocarbon can be used as a mainline, provided you invest in a high-quality fishing line Using a high-end fluoro line as a mainline offers many benefits such as excellent casting distance, abrasion resistance and is virtually invisible underwater. Fluorocarbon lines are fantastic lines in their own right.
Can I use fluorocarbon line as a leader?
Still, the truth is that you can absolutely use regular fluorocarbon lines as leader material.
Is fluorocarbon hard to cast?
While fluoro has some very obvious benefits which keep it on the playing field–extreme clarity, durability, low stretch and a high density that causes it to sink, taking diving lures deeper– it can be very difficult to cast.
Is 6lb fluoro good for bass?
for Panfish and a heavier test (8-12 Lb.) for Bass is a good rule of thumb. Don’t worry, even 6lb Mono will work with all the classic, fundamental fishing tackle.
What weight is fluorocarbon leader?
I normally work with a 10 to 15 lb braid and match it between 15 to 25 lb fluorocarbon. That seems to allow me to get great casts and keep a good presentation to the fish.
What pound line should I use?
Line Strength It should roughly match the weight of the species you are fishing for (e.g. use line in the 30-pound test for tuna in the 30-pound range). A typical line to cast for trout would be 4-pound test. Consider braided line of 30-pound test or more if you go after large game fish.
Why do pros use fluorocarbon?
The benefits are high-sensitivity for the detection of subtle bites, a fast fall rate and fish-fighting strength in deeper scenarios Fluorocarbon leaders make this a best-of-both-worlds deal by adding the low-visibility to your line’s business end.
What is the best line for largemouth bass?
- MONOFILAMENT. A classic line option for any fisherman, monofilament is an individual nylon fiber that is usually inexpensive and is easy to work with
- BRAID. Braided fishing line is another trustworthy option for bass fishermen
- FLUOROCARBON.
What line does KVD use?
Braided line has little or no stretch, making working with top-water lures easier. When I’m fishing top-water lures for bass, I may use a smaller diameter line, like 30-pound-test braid I’ll also use either 30- or 65-pound-test braid to fish standing timber, bushes or brush.
What is the most abrasion resistant fluorocarbon?
For surf, and inshore fishermen, its abrasion resistance is equally appealing. Seaguar, seeing the need for a leader tailored to rocky nearshore environments has unveiled the new Seaguar Inshore This 100-percent fluorocarbon is the most abrasion-resistant leader produced by Seaguar to date.
What is the difference between Red Label and Blue Label seaguar?
Blue label is barrel aged at least 16 yrs, whereas red is as young as 6.
What Seaguar fluorocarbon is best?
Seaguar Invizx has won a lot of anglers to its side, and just a few casts and knots will explain why. This is excellent fluorocarbon main line, and it’s our top choice when we need to spool up clear, sensitive, easy-casting fluoro.
What color is hardest for fish to see?
The science says a multi-colored line that blends into the background should be harder for fish to see and track. While red and green blend well in many situations, blue blends best in offshore waters.
What color do fish see best?
In low light or at night, colors matter less, because fish then rely more on the rod cells in their eyes, which detect contrast and movement but not color. White , offering the greatest contrast, might well be the color of choice in such situations.
Does it matter what color your fishing line is?
And does the color of fishing line matter? The truth is, no single color of braided line has ever proved to cause fish to bite more readily , but that shouldn’t preclude fishermen from being mindful when selecting line.
How much fluorocarbon leader should I use?
Greg Vinson prefers six to 20 feet leaders depending on “water clarity, depth and technique.” He continues: “For weightless rigs like twitching Netbait T-Macs, flukes or wacky rigs I like to use a 6 to 10 foot Seaguar Tatsu fluorocarbon leader.
Should I use a fluorocarbon leader for bass?
Bass are cautious predators, especially in clear water and waters that are heavily fished. Here, using a leader material that is as invisible and stealthy as possible makes a lot of sense and will most likely catch you more fish. Naturally, fluorocarbon is your best choice in such situations.
Should you soak fluorocarbon?
How to spool up with fluorocarbon. 1 Start by soaking the bulk spool of line in a bowl or bucket of warm water to make it supple and reduce the line memory So the line memory is not increased make sure the line is coming off in an anti-clockwise direction before spooling-up.
Can you spool your whole reel with fluorocarbon?
Heavier monofilament and fluorocarbon lines do not perform well on spinning reels because the diameter of the line is large enough that the spooled line will jump off the reel spool when casting. This creates monstrous backlashes that are not easy to fix – plus it wastes time on the water.
Can you back braid with fluorocarbon?
It will be fine as backing It will be fine as backing.
Sources
https://www.tacklewarehouse.com/styleproducts.html?styleref=2915