Definetly a great investment You do have to buy slides every month but it averages out to about 10$ a month but having it as a back up warning makes it so worth it when you consider how much money its protecting in your tank.
How long does a Seneye slide last?
The slide light will flash after 30 days to remind you to change the
sensor slide
. If you don’t change the slide after 30 days, it will stop recording pH and NH3.
What does seneye test for?
Seneye Reef Pack is an all in one monitor for Temperature, Ammonia, pH,
water level
, and Lighting With a PC you can connect your Seneye monitor directly to any PC or Seneye Web Server to monitor your aquarium.
What is Seneye Reef?
Seneye reef product is aimed at reef aquarium keepers and planted aquarium owners The device has a full light meter able to measure LUX, Kelvin and PAR. Easy to use. Constantly monitoring. reliable and accurate early warning before fish killed.
How do you use a
seneye light meter
?
Move the seneye device around the aquarium to read different light levels The seneye light meter sensor is located on the back of the seneye device in the round window. To read the light levels in your aquarium this will need to be positioned at the point where you want to take the reading.
Does seneye work with Mac?
The SWS has a build in web page interface that can be used to view data locally and adjust the setting on the seneye device. This interface is fully Mac compatible , as to is the seneye.me dashboard.
How do you soak a seneye slide?
Soak slide for 24 hours Remember to always soak your seneye slide for a minimum for 24 hours before using it. Take a glass of water from your aquarium or pond and place the slide in Soaking allows the sensor pad time to stabilise so accurate readings can be taken.
How do I set up Seneye WIFI?
- Power On. Plug the Micro USB power cable into the power port of the VIXMINI
- Connect
- Access the Web Admin Panel
- Go to the Internet section of admin panel
- Connect Vixmini to Seneye Web Server
- Finish setting up Vinimix.
How do I monitor my
aquarium ph
?
The most accurate method for testing aquarium water pH is to use an electronic pH meter You may be able to purchase a pH meter from a local pet supply store. Or, if you have an iPhone, iPad, or Android, you can use our smart sensors to turn your smart device into an aquarium pH meter.
How often does seneye take a reading?
The readings from your seneye device are uploaded to your personal seneye dashboard every 30minutes , when connected to a PC.
How do I update my seneye?
Upgrade the light meter in your seneye Home or seneye Pond device to give you LUX, Kelvin and PAR. Once you have purchased the light meter update you must e-mail [email protected] and provide the serial number from the seneye device you would like upgraded.
How do you clean a Seneye?
- Take the device out of the water and remove the back of the device.
- Remove the seneye slide. Place your slide in the water that you are monitoring, if it dries up this can also effect readings.
- Wipe the clear light window and sensor lenses with your finger and rinse off under water.
How do I register for Seneye?
- 1Create your account.
- 2Setup your aquarium.
- 3Profile details.
- 4Confirm details.
Can you connect Seneye to iPad?
Available on iPhone, iPad, Android & Windows 10 Monitor how many days your slide has left. Automatic slide activation using your phone camera or keypad. Easy access to your seneye.me account.
Can you connect Seneye to tablet?
Install seneye connect software on the tablet, connect seneye to tablet via one of the USB ports you now have Change your power setting on tablet to always on when plugged in and bam!.
What pH should a fish tank be?
Since most aquarists keep fish from different environments in the same aquarium, it is best to find a pH that all tank inhabitants are comfortable at. Most freshwater tropical fish do best between 6.8 and 7.8 , however, some species come from areas where pH can be significantly higher or lower than these values.
How often should I check the pH level in my fish tank?
The pH should be tested at least once a month, though preferably every two weeks , to allow for the detection of trends before they become a problem.
What should my freshwater aquarium levels be?
pH – the measure of whether water is acidic (pH 1 to 7.0) or basic (pH 7.1 to 14). 7.0 is considered neutral. Most freshwater aquarium tropical fish do best at a pH of 6.8 to 7.8 , although certain fish may require higher or lower levels.
Do lux meters work with
led lights
?
Lux meters can detect and measure all white light, especially from the sun or incandescent bulb. Lux meters are unable to accurately pick up LED light as LED lights have a higher blue light wavelength. Additionally, lux meters will not be able to tell the luminosity of blue, red or purple LED lights.
Is Lux the same as PAR?
you are right LUX and PAR are not the same LUX meters measure the amount of usable light for humans while PAR meters measure a spectral range including how many photons fall on the the plants in 1 sec within that spectral range.
References
https://premiumaquatics.com/products/seneye-home-aquarium-monitor.html
https://www.marine-aquatics.eu/en/seneye-home-v2-aquarium-monitoring-system