In the following article on my site, I’m going to discuss the subject that is titled “What Are Arabian Bars?.” I will provide you with all of the pertinent information that pertains to the topic. I have high hopes that you will find this essay to be really helpful.
Arabian: Have a narrow front (usually 6.5″ – 6.75″ gullet) similar to the
semi-qh bar
but the back of the saddle has a
flatter pitch angle
So the saddle goes from a
little narrow
in the front to flatter or wider in the back.
Arabian Bars: What are Arabian bars on a saddle
3. Arabian Tree (Arab bars) These saddles are made specifically to fit an Arabian horse They usually accommodate the modern Arabian horse, which is short backed and broader chested.
What are the bars on a saddle?
Saddle:
The Bars of a Saddle When you are talking about the bars on a
western saddle
, you are referring to the two internal structures that run down the length of the saddle The function of the bars is to distribute the weight of the saddle and the rider across the horse’s back.
Arabian Saddle: What is different about an Arabian saddle
One of the most
common generalities
in Arabian saddle fitting is the fact that many Arabians have a shorter back or more specifically 22 vertebrae versus 23 (five lumbar 17 thoracic) that you see in many other equine breeds.
What is a full quarter horse Bar?
Full quarter horse bars are 6 1/4 to 6 1/2 inches apart This size fits horses who are wider in the front shoulders than a semi-quarter horse bar size with extra muscle or fat. As horses age, they may gain weight and need a larger bar saddle or they may become leaner, lose weight and require a smaller bar saddle.
Special Saddles: Do Arabian horses need special saddles
The one saddle that almost always works with Arabians is the Freedom Saddle , made by Crates for Meleta Brown. The bars of this saddle are flared at the shoulders. With the wide Arabian barrel that their shoulders must slide over, the flare allows an easy entry under the bars.
Is a 7 inch gullet full quarter horse bars?
Designed to fit the average horse, one of these two widths will fit approximately 80% of horses comfortably. Full-Quarter horse bars usually have a 7″ gullet.
Size Saddle: What size saddle do I need for a 16 hand horse
Under 16.5 inches, You probably need a 15-inch
seat size
in an English saddle. Between 16.5 and 18.5 inches , Look for a 16-inch saddle. Between 20 and 21.5 inches, Try a 17-inch saddle. Over 21.5 inches, Try an 18- or 19-inch seat size.
Size Bars: What size bars does my horse need
Semi-Quarter horse bars usually have a 6 1/4″ gullet, and Quarter Horse Bars usually have a 6 1/2″ to 6 3/4″ gullet Designed to fit the average horse, one of these two widths will fit approximately 80% of horses comfortably. Full-Quarter horse bars usually have a 7″ gullet.
Size Gullet: What size gullet fits most quarter horses
Gullet width of 6″-6 1/2″ Full Quarter Horse Bars have even wider angles to accommodate wider-bodied horses and horses with flatter or “Mutton” withers. Gullet width of 6 3/4″- 7″. The gullet width should be about the same width of the wither’s, approximately 2″ below the top of the withers.
Arab Saddle: What is an Arab saddle
Arabian horses have distinctive body shapes and we have found a
good selection
of western trail saddles to fit your Arabian. They have shorter skirts with wider gullets and a bit more curve, just as your horse was designed. View our selection of Arabian saddles.
Why does my saddle pop up in the back?
Saddle:
However, if you do have a situation where the saddle really is lifting up at the back, the most common reason is that the saddle is too wide for the horse This can be because of too wide a bar spread or too wide a bar angle.
What is a
saddle tree
?
saddle tree (plural saddle trees) The base on which the rest of the saddle is built Usually based on wood or a similar synthetic material, it is eventually covered in leather or a leatherlike synthetic. The tree size determines its fit on the horse’s back as well as the size of the seat for the rider.
Saddle Gullet: What is a saddle gullet
The gullet is the tunnel underneath the fork and rides over the horse’s withers The design of the fork and the angle of the bars of the saddle tree determine the width and height of the gullet.
Quarter Horse: Can I use a gaited saddle on a quarter horse
Typically the gaited horse will require a 12-inch spread in the shoulder area of the bar while the Quarter Horse will require 13. If you put a saddle made for the Quarter Horse on the gaited horse it will fit at the top (or in this case gullet) but there will be no support at the shoulder.
How do you tell if your saddle fits your horse?
Saddle:
Your saddle fits just right if it sits level on your horse’s back and the bars of the tree do not pinch The front of your saddle should be positioned behind your horse’s shoulder blade, allowing him freedom of movement. Your saddle is too narrow if the front of the saddle sits high.
Size Gullet: What size gullet does a pony need
The gullet width should be about the same width of the wither’s, approximately 2″ below the top of the withers Just remember, the main thing you need to know is, is your horse narrow, wide or in-between!.
Horse Bars: What are horse bars
The bars are the two pieces of the tree that go on the horse’s back They are what need to fit the shape of the back – in length, spread, angle, twist, rock, crown, etc.
Saddle Swell: What is saddle swell
Swell: The swell is the part of the saddle that holds the bars together and supports the horn 1. A-Fork – A-forks were very popular on ranch saddles back in the day. They are still a very widely used style on today’s working ranch saddles.
Saddle Pad: Is fleece or felt better for a saddle pad
In general, felt pads made from wool are considered superior because they are softer and more pliable, have better moisture-wicking, dissipate heat uniformly, and ensure a better saddle fit. These days, fleece pads usually come with fleece lining on the underside of the pad with quilted cotton on the outside.
Are Lovatt and Ricketts saddles good?
Ricketts:
A great saddle – light weight with a wonderful deep, secure seat, not to mention the easy quick adjust stirrup leathers (a great feature). All this and it looks great too. Try one out. If you trail ride or compete- it’s a great saddle.
Albion Saddles: Where are Albion saddles made
The Albion Adjusta-Tree™ Story Did you know that all Albion Trees are made in our British factory in Walsall, West Midlands ? Albion has responded to the needs of the sport horse, creating trees that allow freedom of shoulder movement and panel stability within each and every saddle.
Flex Tree Saddle: What is a flex tree saddle
A flex tree saddle has bars that are flexible, allowing the saddle to flex with the horse The flexibility ‘enhances’ an already proper fit, it doesn’t attempt to create it.
What is mutton withered horse?
Mutton:
Low Withers Also known as mutton-withered horses, this kind of horse has a gradual slope towards its rear and lacks shoulder definition It may also have a rounder and/or flatter back. Sometimes, a horse may have no withers at all. Low withers are common among American Quarter horses, ponies, and Arabians.
Size Tree: What size tree does my horse need
The tree must not only be wide enough for the withers, but it has to accommodate the horse’s shoulders They should be able to rotate freely, and for that to occur, the tree angle must match the shoulder angle. The scapula motions upward and backward as the horse moves.
Hoop Tree Saddle: What is a hoop tree saddle
HOOP TREE: a broader and
low profile tree
with inverted ‘U’ shape head and slightly flatter through the body Offering a slightly wider gullet and flatter rails often works well on profiles of Baroque, Draught, Native and some heavier old style Warmbloods.
Thornhill Saddles: Where are Thornhill saddles made
While some saddles are still made in England and Germany, many are made by Master Saddlers in Argentina to keep an affordable price point without sacrificing quality. Models include Pro-Trainer Platinum 24K Close Contact, 24K Event, Grand Prix, LeMonde, Paris, Spring and Coco for jumping.
How wide should the gullet be on a saddle?
Gullet:
The ideal width for a saddle gullet is between 2.5″ and 4″ depending on your horse.
Western Gullet: Are English and Western gullet sizes the same
The gullet size on Western saddles can be confusing, basically measurements go 2″ larger than normal english saddles (So a 16″ western is up to an 18″ English equivalent).
Saddle Size: How do you determine saddle size
It’s easy to measure a western saddle’s seat size. Use a retractable tape measure. Start the tape measure behind the swell and stretch it across the seat to the front of the cantle That measurement is the seat size.
Where do you measure a gullet?
Gullet:
The saddle gullet should span the withers, resting on the withers about 2 inches below their highest point and leaving a gap between the top of the withers and the bottom of the saddle Place your hand into the space between the saddle and your horse’s wither, using your fingers to measure the vertical space.
Citations
https://theconnectedrider.com/blogging/saddle-fitting-the-arabian/
https://www.saddlefitter.com/post/saddling-the-arabian
http://www.darkhorsesaddlery.com/western-tack-fitting.html
https://animals.mom.com/tell-saddle-full-bars-quarter-bars-4413.html
https://www.americansaddlery.com/index.php?option=com_virtuemart&view=category&virtuemart_category_id=64&Itemid=165