Simple Answer: Vmc Spinshot, How Do You Use The VMC Spinshot

The following topic, How Do You Use The VMC Spinshot?, will serve as the primary emphasis of this blog post, and you can expect to learn a significant amount of information that is pertinent to the subject from reading it. If you are interested in gaining more knowledge on this subject, continue reading.

What is the

best hook

for a drop shot?

For really

small baits

, around the 2.5-3 inch range you are going to want to go with a size #3 or size #2 drop shot hook If the fish are really finicky you may even want to drop this down to a size #4 or size #5.

Can you use any hook for drop shot?


Drop:

Hooks. Hooks are not a place to skimp on cost; it is important to use a quality hook I prefer Gamakatsu, but there are plenty of other manufacturers that make quality hooks. I tend to go a

little smaller

in hook size than some drop-shotters, preferring a size 1 or 2 octopus-style or split-shot/

drop-shot hook

.

Are VMC hooks any good?


Good:

Are VMC Hooks Any Good? Yes! VMC hooks are revered by anglers all over the world for their impeccable attention to detail For novice and experienced anglers alike, having a set of VMC hooks in the tackle box is always a safe bet.

Drop Hook: How do you rig a drop hook

Drop Shot Rig Knot Tying Instructions While holding the

overhand knot

between thumb and forefinger, pass end of loop over the hook. Slide loop to above eye of hook. Pull on both standing line and tag end to tighten down the knot onto eye of hook. Now feed tag end back through hook eye from above.

What size hooks for dropshot?


Dropshot:

The size 2 is the most commonly used hook for the drop shot technique. Each pack contains six hooks.

Circle Hook: Can I use circle hook for drop shot

The key to drop-shotting is to maintain contact with the bottom. Unless the sonar is showing fish suspended high off the bottom – which requires a different technique – keep the sinker on the bottom and the bait just a 12 to 18 inches from the sinker. Using circle hooks means you don’t have to set the hook.

Octopus Hooks: Can you use octopus hooks for drop shot

Here are the tackles necessary for setting up a

drop-shot rig

– either an octopus hook or a

drop-shot hook

and a terminal sinker. In this photo, it is a size 8 Gamakatsu Octopus hook and a 3/32 oz tungsten weight. Picture #1: These are the tackles (hook, sinker, Hawg Shad) required for rigging a drop-shot.

Best Size Drop: What is the best size drop shot hook for bass

Dropshot hooks come in a wide range of sizes which can make it difficult to know which is best. In general you want to use the smallest hook you can get away with. For bass #1 and 1/0 size dropshot hooks are best.

What weight should I use for drop shot?


Weight:

“ Use the lightest weight you possibly can , and still be able feel your drop shot,” says Lee. “But as a rule of thumb, if you’re fishing less than 15-feet deep, try starting with a 1/4 –ounce weight, and if you’re fishing those deep zones like 25 or 30 feet, it’s probably best to use a 3/8-ounce in most situations.”.

Pound Test Line: What

pound test line

do bass pros use drop shot

“The number one thing most anglers do wrong when drop shotting is use line that’s too heavy,” concludes Powroznik. “Stay away from 8 and 10 pound test, loosen your reel’s drag a little bit, and use 6 pound Hi Seas fluorocarbon instead. I swear you’ll get more action out of your lure, and way more bites.”.

Vmc Hooks: What does VMC hooks stand for

the first vmc hooks French family company Viellard Migeon and Company , established in 1796, begins to produce fish hooks.

Vmc Hooks: Where are VMC hooks made

VMC PECHE has been producing fish hooks in its factory in Morvillars in the Territory of Belfort in France for over 100 years.

Strongest Treble Hooks: Who makes the strongest treble hooks

1. Mustad Ultra Point KVD TG-76 Triple Grip Treble Hook (for Lures) Mustad always produces high-quality hooks and their KVDs are probably the best ones out there when it comes to treble hooks for lure fishing.

Wacky Rig: What hooks for wacky rig

Assuming you are fishing a 5 inch wacky rig senko or stickbait (which is what people fish on a wacky rig 90% of the time), a 1/0 hook is widely considered as the best option.

Drop Shot Leader: How long should a drop shot leader be

When To Use A Long Drop Shot Leader. Longer leaders ( 18-36 inches ) are best whenever you are making long casts with the rig. On a long cast, the line will be coming off the bottom at an angle to the boat, and a longer leader is necessary to keep it up off the bottom.

Neko Rig: What is the Neko rig

The Neko Rig is a relatively new phenomenon in the bass community. Basically, it is a weighted version of a wacky rig with a weight inserted into just one end of the soft plastic, giving the bait a

unique action

as it falls and allows it to stand straight up once it hits the bottom.

Drop Shot Rod: Can you use a drop shot rod for jigging

In addition, it is a perfect rod for fishing light jigs Because of the soft tip, only this part will bend a little when jigging, making it perfect for playing and jigging.

Can I use Mono for drop shot?


Drop:

One of the most common fails for drop shot fishing is using the wrong leader line. Many anglers make the mistake using monofilament or braided line as the leader line… I know the big companies say monofilament is a good choice because of its cheap price, but nothing can be further from the truth.

Texas Rig: What hooks for Texas rig

There are three basic types of hooks that I would recommend: straight shank, offset round bend and offset wide gap Each of the three types have unique and situational benefits when using a Texas rig.

Texas Rig: What is a Texas rig in fishing

The Texas Rig is a technique used for fishing

soft plastic

lures It involves a bullet weight being threaded onto the line first followed by an optional glass or plastic bead, and then the line is secured to a hook, usually an

offset worm hook

. Very good for bass fishing.

How far should weight be from hook?


Weight:

Attach one or two weights to the fishing line. The U.S. Fish and Wildlife Service suggests placing the weighs 6 to 12 inches above the hook Most weights are incredibly easy to attach with the use of needle-nose pliers.

Octopus Hooks Good: Are octopus hooks good for bass

Octopus hooks are often used for bait fishing when minimal hook weight and size is essential for a natural presentation. These hooks are great for hooking a leech through the sucker The Bass Pro Shops XPS Octopus hook is a good example and highly rated. A mosquito hook is a variation on this style.

How far from the hook should the bobber be?


Bobber:

For the bobber, a smaller one is more sensitive and offers less resistance to the fish so it can eat your bait easily. Finally, a short distance between the bobber and the hook ( 1 to 2 feet , normally) gets your worm in front of many fish yet keeps your hook from snagging the bottom.

Bass Fishing: What weight should I use for bass fishing

Sinkers most commonly used with plastic worms, lizards and creatures weigh 1/4 to 1/2 ounce With tube baits, finesse worms and grubs, try a 1/8- to 1/4-ounce sinker or jighead. Sinkers used for Carolina rigging are heavy, usually 1/2 to 1 ounce. Experiment with sinker/jighead weights to fine-tune your presentation.

Citations


https://www.tacklewarehouse.com/VMC_Spinshot_Drop_Shot_Hooks/descpage-VMCSS.html








https://vmcpeche.com/products/spinshot-dropshot-hook