The Lund 1650 Rebel XL is a very popular 16-foot
fishing boat
This versatile aluminum fishing boat is perfect for any type of fishing. The tiller-drive format makes it easy to backtroll, and the wide-open layout means plenty of room for moving around to land fish.
How much does a Lund rebel weight?
Chine Width: 70.5 in. Transom Height: 20 in. Cockpit Depth: 22.5 in. Standard Boat Weight: 965 lb.
Do
lund boats
hold their value?
Although some attribute this to their higher initial price point, Lund boats have a reputation for holding their value A 1775 Impact Sport made in 2015 sold new for $29,725 in that year. This boat has a current average resale value of $22,900. This is a depreciation of 23%, which is very good for about 5 years.
Can Lund boats go in the ocean?
Lund is a great boat and I would say they are far from cheap and far from inexpensive. You can fish the ocean in one no problem but dont go too far out.
What years did Lund have transom issues?
This is a common problem with 2000 to 2007 vintage Lunds. That was the end of the Genmar era before they were purchased by Brunswick. Unfortunately there is no warranty on these boats.
Do Lund boats leak?
Lund Boats are Riveted The downside is that a riveted boat is more likely to leak I know this from personal experience. My small fishing boat has rivets, and it leaks. The leaking isn’t severe, but the bottom of the boat definitely has water in it when I’m done.
Do Lund boats have lifetime warranty?
Lund Boats are proud to offer “BOATING’S BEST WARRANTY” Lund’s lifetime warranty gives you the
best overall coverage
ever available on hull material and workmanship. Warranties include: Lifetime warranty on
double-riveted seams
. Lifetime warranty on all plywood panels, related materials and labor.
Do Lund boats need a transom saver?
Lund does not have a recommendation whether to have a transom saver or not.
How long does it take to get a Lund boat?
Special order is the only option if you want a Lund. When I ordered it they said 4 to 6 weeks.
Does Lund use wood?
No wood in transoms throughout the Lund line up Its amazing that it took any boat company this long to figure out that wood as a component material was a bad idea. “WHAT MATERIAL IS USED IN LUND TRANSOMS? In 2017, select models have a composite transom.
Are Lund Boats foam filled?
Lund strategically injects marine-grade closed-cell foam into all our boats.
Who is Lund boats owned by?
Lund and Crestliner are owned by Brunswick Corporation , the largest marine manufacturer in the world. For additional information about our boats and our brands visit www.lundboats.com and www.crestliner.com. Since 1948, Lund has been building boats from the heart of lakes country in New York Mills, Minn.
Is Lund still building boats?
Today, Lund retains its reputation as the industry’s leading aluminum fishing boat company Built by fishermen for fishermen, we continue to innovate while honoring the boat-building traditions that have made the name legendary.
Where are Lund boats made?
Since 1948, Lund has been building boats from the heart of lakes country in New York Mills, Minn Built with
professional grade materials
to withstand a lifetime of use, Lund Boats are guide tested and wilderness proven and demanded by more camps, resorts, fishing guides and professionals throughout North America.
What is the draft on Lund boats?
Lund 1875 Crossover XS is a 5.74 meters fishing boat with accommodation for 8 people and the draft of 1.02 meters.
What is the warranty on a Lund boat?
Lund offers it’s Boating’s Best Lifetime Warranty , including a lifetime warranty on double-riveted seams, transom and flooring. There’s also a three-year bow-to-stern coverage. See dealer for details.
How long do transoms last?
On to fabricating the replacement transom: Most, if not all wooden transoms in smaller boats are made of plywood. From the looks of the transom in this boat, I would estimate a typical transom will last about 20 years or so before they need to be replaced.
Are Lund boats made in Mexico?
Brunswick Corporation’s manufacturing facility in Reynosa, Mexico , has recorded more than four million hours, which is nearly three years, without a lost-time incident. The plant has been part of Brunswick since 2002 and builds Bayliner, Sea Ray, HeyDay and Lund Fiberglass Sport Boats ranging from 16 to 25 feet.
Is Lund a good brand?
Lund Boats is famous as a high-quality brand Many buyers choose a fishing boat based on a combination of price and quality, but if you’re looking for the best of the best in quality, go for the Lund. Lund Boats costs more than most of its competitors on the market, but the quality is unmatched.
Does Lund make fiberglass boats?
TACKLE STORAGE The Lund Tyee GL fiberglass boats utilize every square inch to maximize space for fishing tackle and gear. Whether it’s rain gear or tackle boxes, Lund has it covered.
Where is the serial number on a Lund boat?
The hull identification number (HIN) on all boats built after November 1, 1972 is permanently affixed to the rear of the transom usually on the upper right corner.
How do I contact Lund?
- (802) 864-7467 or (800) 639-1741.
- 50 Joy Drive, So. Burlington – (802) 864-7467.
- (802) 864-7467.
Should you tow your boat with the motor up or down?
Trailering with the engine in a vertical position puts the least amount of strain on the motor and transom , but that’s not possible for many boat/trailer/engine combinations due to ground clearance issues.
Are transom savers worth it?
“There is a great deal of impact on the transom while traveling down the highway,” notes Ranger’s Trailer Engineer Rick Huddleston, “and a transom saver [connected to the rear cross member of the trailer] is far more effective at preventing stress at the engine bracket and transom than using the ’tilt/lock’ feature on.
What is the difference between Lund impact and Pro V?
According to Lund’s website, the Pro-V 1875 is capable of a max speed of 56mph compared to the Impact 1875 Sport’s 52mph.
Who makes Lund fiberglass boats?
Now comes Lund, owned by Brunswick , manufacturer of Mercury Outboards and a host of other boat brands, including Crestliner and Triton, throwing its weight and considerable dealer network behind four fiberglass models, each made in Tennessee at the Triton plant.
Are Alumacraft boats welded or riveted?
For instance, Alumacraft’s Jon boats are welded, and most of their tournament boats are riveted Both methods are durable options when they are properly done. One advantage Alumacraft currently has is that most of their hulls are one piece, so there is no seam in the center (the ribs are still riveted).
Sources
https://www.thehulltruth.com/boating-forum/859865-why-not-lund-offshore.html
https://www.lundboats.com/families/rebel-xl.html