Tread Materials Three basic thread types dominate the fly tying market. Nylon, Polyester and Kevlar are the most used threads by today’s tiers. Silk or newer gel spun polyethylene (GSP) is also available if one looks hard enough. Nylon and polyester are cheap, thin and strong, making them ideal for tiers.
What size thread is best for fly tying?
Common thread sizes for trout flies are 8/0 for drys, 6/0 for nymphs, and 3/0 for larger flies The problem is that this “zero” measurement system doesn’t relate to any practical form of measurement and one company’s 6/0 may be smaller than another’s 8/0.
Is fly tying thread different than sewing thread?
Consider the cheap and ubiquitous, humble sewing thread. It’s thick (as far as fly tying threads go), bulky, it won’t lay flat, it’s got a rough texture and using it can help you become a better fly dresser. Because of these features, it forces you to be more cognizant of every single wrap you make.
Can you use sewing thread to tie flies?
Sewing thread can be made from a variety of materials but some like cotton absorb water very well which will help sink your fly without adding weight 3. It’s cheap. Sewing thread can be more than 50% cheaper than fly tying thread.
Why does my fly tying thread keep breaking?
One of the most common reasons thread breaks, especially with a
new bobbin
, is an improperly adjusted bobbin Other factors like sharp edges and hook points often cut the thread, but if the thread actually breaks, it’s usually a case of too much tension, and often that’s due to an improperly adjusted bobbin.
What is the thinnest fly tying thread?
Size 8/0 is usually the thinnest thread available; we select this thread for tying midges, dry flies, and small nymphs.
What is Danville thread made of?
Danville’s and
utc ultra thread
are both made of nylon Nylon has a fair amount of stretch, (25 to 30 percent), naturally lies flat, and has a silky smooth finish and a glossy sheen.
What is UNI thread made of?
UNI-Thread is made of continuous polyester filaments , slightly bonded, which ties flat on the hook.
What size is 70
denier thread
?
Size – The textile industry standard for measuring thread is referred to as a denier. Denier is the measured mass in grams of 9,000 meters of thread. For example, if the mass of thread is 70 grams , it is considered a 70 denier thread.
What is nylon thread?
Nylon threads are
synthetic threads
(polyester threads are synthetic as well) often used in the form of a monofilament clear thread or as a textured fuzzy (woollie-like) thread.
Who makes UTC thread?
UTC 70 Ultra Thread Nylon Bob Marriott’s.
What thread do you use to tie
crappie jigs
?
The Only Thread You’ll Need If you’re tying Buggs (the coolest and most effective jigs on the plantet!), Bass Flies, Saltwater Flies, and anything else in the crappie jig size and larger, here’s your thread! It’s called Danville’s 210 Denier Waxed Flymaster Plus Danville Chenille Co., Inc.
What is dubbing wax used for fly tying?
For dubbing purposes, I suggest using a light colored rosin If a dark wax is needed to color silk thread (as is recommended for some Yorkshire wet flies) I suggest using a dark rosin. The second ingredient is refined bee’s wax, which I have found in both hardware and craft supply stores.
What is dubbing wax made from?
Dubbing wax – also called ‘dubbin’ in short – is a classic care product made from oil, tallow and natural wax , traditionally used to soften, condition and waterproof leather.
Why does my thread keep shredding?
The most common reason why thread shreds, frays, or breaks at the needle is because the eye is too small to accommodate the thread, causing stress and friction , which results in shredding or breaking the top thread.
Does thread get old?
Yes, sewing threads do go bad over time resulting in breakage or discoloring due to temperature, humidity and sun exposure What is this? High-quality sewing machine thread can last up 50 years when kept in optimal conditions.
What is the remedy for lower thread breaks?
- Rethread the bobbin case.
- Adjust the tension of thread.
- Wind the bobbin evenly.
- Clean the bobbin case and shuttle.
Citations
https://1source.basspro.com/news-tips/fly-tying/5912/think-thread-doesnt-matter-when-tying-flies-learn-how-pick-right-thread
https://www.amazon.com/Fly-Tying-Thread/s?k=Fly+Tying+Thread