But if you just changed it and it’s not working as intended, it may need resetting Reset the collar by removing the battery and holding down the correction level button for about 10 seconds. Then put the battery back in and switch the collar on. Make sure that the indicator light is on.
Do
wireless fences
work for stubborn dogs?
The PetSafe® Stay & Play® Wireless Fence for Stubborn Dogs will reliably keep your stubborn dog safe in his yard without having to bury any wires or build a traditional fence This wireless fence creates a circular boundary around your yard that adjusts to fit up to 3/4-acre.
How do I reset my PetSafe wireless fence collar?
Press and hold mode button on collar for 20 seconds The light may come on and fade out. Place the battery back into the collar and twist to lock.
How long do PetSafe wireless collars last?
The Wireless Containment System unit can last up to approximately 10 years or more if used properly. Batteries on the collar can last and be replaced up to 1 to 2 months.
How do you reset a stubborn dog collar?
To reset the low battery indicator, remove the battery from the
receiver collar
. Discharge all power by holding the correction level button down until the light is no longer illuminated Reinstall battery.
Why is my electric dog collar not working?
Equipment Make sure your battery is charged in both the collar and the transmitter Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How does the stubborn dog collar work?
The system works by producing a radio signal from the Fence Transmitter through up to 2800 feet of Boundary Wire The Boundary Wire is buried or attached to a fixed object to enclose the
pet area
. You temporarily define this Pet Area with Boundary Flags for a visual aid in training your pet.
What do I do if my dog runs through an Invisible Fence?
- Check if your boundary width is set to the optimal distance.
- Test batteries in the collar.
- Test the fence to see if collar is working when passing over fence.
- Turn up the transmitter dial.
- If the collar works, make sure your dog is groomed well so that it’s closer to the skin.
What is the best wireless dog fence on the market?
- PetSafe Wireless Containment System – Best Overall. Check Price on Chewy
- PetSafe Basic In-Ground Fence System – Best Value. Check Price on Chewy
- PetSafe Stay & Play Wireless Fence – Premium Choice. Check Price on Chewy
- PetSafe Stay & Play Compact Wireless Fence. Check Price on Chewy.
Why is my Invisible Fence collar not working?
My pet’s Invisible Fence collar doesn’t activate at the boundary, what is wrong? Ensure that your pet’s Computer Collar receiver is fitted properly to his neck The collar should be snug enough to slide only one finger between a correction post and your pet’s skin.
What does it mean when my petsafe collar is blinking red?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet’s Computer Collar unit, your Power Cap battery may need to be replaced You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
Why is my PetSafe collar randomly beeping?
If your house is very big and if the
containment area
has a relatively small radius, it’s likely that a part of the containment boundary falls somewhere inside your house , causing the collar to beep whenever it crosses that part of the boundary.
How long does it take to charge a PetSafe collar?
Step 1: Charge the Receiver Collar The collar light is red while charging and green when fully charged. The first charge will take about 2 or 3 hours Each charge can last up to 3 months depending on the frequency of use.
Are all PetSafe collars compatible?
All wireless fences will work with any wireless fence collar It is a good idea to know how to identify which system you have to ensure that you have a wireless system. You can identify your system using model numbers on your base unit, collar and product packaging.
How long does it take to train dog on Invisible Fence?
We suggest at least 14 days of training. Depending on how quickly your pet learns, training could take less time. Your dog might also need longer than 2 weeks. Just don’t try to do too much too quickly.
What is the difference between PetSafe wireless fences?
What is the difference between the Petsafe Wireless Fence and the Stay and Play System? The PetSafe Stay + Play Wireless Fence works up to a range of 3/4 acre and has rechargeable batteries. The PetSafe Wireless Fence works up to a range of 1/2 acre and comes with a RFA-67D battery.
Do invisible fences work for big dogs?
While traditional fences work well on flat or gently sloping yards, invisible fencing works on almost any terrain Invisible fences can span hilly spots, wooded areas and water. Also, electronic fences can cover acres of ground in any pattern to create large exercise areas for dogs.
How long do perimeter batteries last?
The eXtreme Dog Fence replacement battery is for use with all eXtreme Dog Fence systems and also Perimeter Technologies in-ground dog fence system receiver collars. These 6-volt batteries have a lifespan of about 2-4 months.
How long do electric dog collar batteries last?
The batteries should last for a period of 3-5 years When a battery needs replacement, you can order a new pack by contacting us. Please do not open the Collar Receiver or Remote Transmitter until you have received the replacement.
Is the PetSafe collar waterproof?
PetSafe Add-A-Dog Remote Training Collar – Perfect for Small, Medium and Large Dogs – Choose from Tone, Vibration, or 15 Levels of Static Stimulation – Waterproof and Durable.
How do I reset my PetSafe remote?
Press and hold the power button for 10 seconds to reset the collar The collar turns off, then flashes green and beeps to indicate that it has been reset. Release the button. Press and hold the button on the collar until a beep is heard and the light flashes green indicating that the collar has power.
How do I sync my PetSafe collar to my transmitter?
Put boundary switch on transmitter in the ‘high’ position. Turn the boundary control dial on the transmitter to position 4. Standing within 1.5 – 3 metres of the transmitter, re-insert the batteries into the receiver collar(s). Test the boundary by walking out into the safe zone until your receiver responds.
What do you do if your shock collar doesn’t work?
Increase the Stimulation Range Refer to “Changing Stimulation Ranges” for more information. Make sure the Collar Receiver’s Contact Points are placed snugly against your dog’s skin. You may need to switch to the longer Contact Points included with your system or trim the hair beneath the Contact Points.
How do you reset a dog shock collar?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How do you fix a dog shock collar?
Here’s how to check and fix your dog shock collar in a nutshell. Check that the battery on the receiver collar is fully charged and replace it as needed Verify that the transmitter has power, is on, and it’s functioning. If you have a handheld transmitter then also check it’s battery and replace it if needed.
Does snow affect Invisible Fence?
The electric dog fence does actually work in the snow as long as power is to the unit.
How do I increase the power on my Invisible Fence?
- Push the button on the receiver. A light on the receiver will flash
- Adjust the distance from the boundary wire to trigger a warning alarm. Most transmitter boxes have a knob or lever to use to change the distance
- Change the metal prongs on the receiver.
Which is better spot on or Halo?
Both GPS systems work the same way, but when it comes to features, SpotOn wins this category With SpotOn, you can create 1,000 fences, which can overlap each other. Halo only allows you to set up 20 fences, but you can’t overlap them. Still, both systems can cover an extremely wide area of property.
What is the largest area for wireless dog fence?
A GPS fence for 1/2 acre to 1000’s of acres No boundary is too big! The SpotOn GPS Fence is a good solution if you need a large area wireless dog fence, as it works from 1/2 acre to 1000’s of acres. It is also fully portable and allows you to create up to ten customized fences.
Are GPS dog fences effective?
Are GPS-Based Electric Dog Fences Accurate? The simple answer is NO There is a margin of about 30 feet before the signal is activated resulting in unclear boundaries. Electric dog fences like the PetSafe YardMax can be far more accurate providing both alerts and corrections with minimal margin of error.
References
https://www.chewy.com/app/product-questions/48853
https://store.petsafe.net/stay-play-wireless-fence-for-stubborn-dogs
https://www.petco.com/shop/en/petcostore/product/petsafe-stubborn-dog-wireless-receiver-collar